Whirlpool FSCR80410 Use and Care Guide download pdf (Page 40)

Display message Possible Cause Possible Solution

FdL

(or F29)

The door cannot unlock. Firmly press the door on the area

of the door lock, then press On/O

for at least 3seconds.

If hot cycle is selected, wait until

cool down and press again On/O

for at least 3seconds.

Switch on the washing machine.

If failure still appears, check and

eventually remove possible cause

as indicated for failure “Clean

lter”. Then switch the washing

machine on again. If door does

not unlock, press On/O for at

least 3seconds.

If door still does not unlock, refer

to section “DOOR – HOW TO OPEN

IT IN CASE OF A FAILURE”. Before

draining water / opening the door,

wait until the water has cooled

down (for hot wash programmes).

Fod Excessive foam formation

(maybe by overdosage of

detergent) interrupted the

programme. The interruption

can be repeated several times

until the foam reduction is

sucient.

Start “Rinse&Spin” programme,

with option Intensive Rinse.

Respect the dosing

recommendations by the

detergent manufacturer.

Adjust and use the Dosing Aid

function.

Make sure that the water lter is

clean.

1 ... 39 40 41 ... 52

No comments

Whirlpool FSCR80410 Use and Care Guide Page 40