Whirlpool FWG81496 S UK Instruction for Use download pdf (Page 9)

User manual

HOW TO USE THE APPLIANCE

FIRST TIME USE

Remove any manufacturing debris:

• Select the “Cotton” programme at a temperature of 60°C.

• Pour a small quantity of detergent powder into the

main wash compartment of the detergent dispenser

(maximum 1/3 of the quantity the detergent manufacturer

recommends for lightly soiled laundry).

• Start the programme without adding any laundry (with

empty drum).

• See section “DAILY USE” for more information on how to

select and start a programme.

DAILY USE

PREPARING THE LAUNDRY

Empty pockets

• Coins, paper clips, etc. could damage the load and

the washing machine components.

• Tissues will break down during the wash cycle,

and the fragments will have to be subsequently

removed by hand.

Close all zippers, buttons, and hooks. Tie all

ribbons or belts

• Insert the smaller garments (e.g. nylon hosiery,

belts, etc.) and garments with hooks (e.g. braziers)

into a fabric bag or a pillowcase with a zipper.

Remove any rings from curtains, or else place the

curtains inside a fabric bag together with the rings.

Fabric type / Symbol on the wash label

• Cottons, mixed bres, easy care/synthetics, wool,

handwash items.

• Colour

Separate coloured and white items. Wash new coloured

articles separately.

• Size

Wash items of dierent sizes in the same wash load, to

improve washing eciency and distribution of the articles

in the drum.

• Delicates

Wash delicate items separately; they require gentle

treatment.

HOW TO USE THE WASHING MACHINE

1. Load laundry

Open the door and load the laundry. Load the

articles one at a time loosely into the drum, without

overlling. Observe the load sizes given in the

“PROGRAMME CHART” table. Overloading the machine will

result in unsatisfactory washing results and creased laundry.

2. Close door

Make sure that no laundry gets stuck between

door glass and rubber seal. Close the door so

that you can hear it click shut.

3. Open water tap

Make sure that the washing machine is connected to

the water mains. Open the water tap.

Switch on washing machine

Press the “ON/OFF” , the “Start/Pause” lamp ashes

slowly.

4. Set the desired programme

Select the required programme with the “Programme

selector” dial. The duration of the wash cycle is shown

on the display. The washing machine automatically

displays the maximum temperature and spin speed settings

possible for the selected programme. Adjust the temperature

and/or spin speed settings if needed with the relative

buttons.

Change temperature, if needed

Press the “Temperature” button to progressively lower the

temperature setting until cold wash has been set (“- -“ will

be shown on the display). Pressing the button again sets the

highest possible setting.

Change spin speed, if needed

Press the “Spin” button to progressively decrease the spin

speed until the spin cycle is turned o (“0” will be shown

on the display). Pressing the button again sets the highest

possible setting.

Select options, if needed

Press the button to select the option; the respective symbol

on display illuminates.

Press the button again to cancel the option; the light

extinguishes.

! If the selected option is incompatible with the programme

set, the incompatibility will be signalled by a buzzer (3 beeps)

and the corresponding indicator light will ash.

! If the selected option is incompatible with another

previously set option, only the most recent selection will

remain active.

1 2 3 4 5 6 7 8 9 10 ... 19

Comments to this Manuals

No comments

Whirlpool FWG81496 S UK Instruction for Use Page 9

Comments to this Manuals

Related products and manuals for Washing machines Whirlpool FWG81496 S UK