Whirlpool W10192074B-SP Use and Care Guide download pdf (Page 12)

2. Close the washer door by pushing it firmly until the lock clicks.

The washer door will remain locked during the wash cycle.

NOTES:

■ After any wash cycle is completed, the door must be

opened and then closed before a new cycle can begin.

■ The door can be opened only if PAUSE/CANCEL is

selected while the Add A Garment light is glowing or if

the cycle has been canceled.

■ See “To cancel a cycle” in “Changing Cycles, Options,

and Modifiers” section.

3. Open the dispen

ser drawer and add laundry products to the

detergent, bleach, fabric softener, or oxygen based stain

fighter/ color-safe bleach compartments. Close drawer slowly

to avoid spills. See “Usin

g the Dispenser.”

Turn on the washer by selecting POWER. Select one of the cycles

by turning the cycle selector. The indicator light for the selected

cycle will glow green. When you are selecting a wash cycle, the

preset options and modifiers (such as Water Temp, Spin Speed,

and Soil Level) for the selected cycle will glow green. Selectable

options will glow amber. If an option or modifier is unavailable

with a selected cycle, the light will not illuminate. The display

shows the estimated time remaining. The preset settings provide

the recommended fabric care for the selected cycle. See “Cycles.”

5. Select the desired Options. Not all options are available with

all cycles. See “Options.”

6. Select the desir

ed modifiers such as Water Temp, Spin Speed,

and Soil Level. Not all modifiers are available with all cycles

and options. See “Modifiers.”

7. If desi

red, select the CYCLE SIGNAL. The signal is helpful

when you are washing items that should be removed from the

washer as soon as it stops. Select Loud, Soft, or Of

8. If desir

ed, select the BUTTON SOUND. This feature makes a

sound each time a button is pressed. Select Loud, Soft, or Off.

9. Select and hold START for approximately 1 second.

■ If you do not select START within 5 minutes of choosing

a cycle, the washer automatically shuts off.

■ When the wash cycle is complete, the DONE status light

glows, the door unlocks, and the wash load can be

removed from the washer. The washer powers down

automatically 60 minutes after the cycle is complete

and the DONE light goes off. To power down the washer

manually after the wash cycle is complete, select PAUSE/

CANCEL once.

10. T

o use the same cycle again, press POWER first, then select

START.

11. To begin

the wash cycle later

Select DELAY WASH until the desired delay time (in hours)

shows in the Estimated Time Remaining display. Select START.

The countdown to the wash cycle will show in the display

window.

IMPORTANT: When delaying a cycle, use only powdered

detergents in the main wash compartment since liquid

detergents may seep out of the compartment during Delay

Wash, before the wash cycle begins.

Using the Dispenser

Your new washer has a dispenser drawer with four separate

compartments for your laundry products—one is for high

efficiency detergent, one is for liquid chlorine bleach, one is for

liquid fabric softener, and one is for oxygen based stain

fighters

or color-safe bleach. Laundry products ar

e diluted and dispensed

automatically at the proper time during the wash cycle, making it

unnecessary for you to return to the washer during the cycle to

add them.

It is normal for small amounts of water to remain in the

dispensers when the wash cycle is complete.

Do not put laundry products directly

into the wash tub. Always

use the proper dispensers when adding laundry products.

Choosing the Right Detergent

Use only High Efficiency detergents. The package for this type of

detergent will be marked “HE” or “High Efficiency.” This wash

system, along with less water, will create too much sudsing with a

regular non-HE detergent. Using regular detergent will likely result

in washer errors, longer cycle times, and reduced rinsing

performance. It may also result in component failures and

noticeable mold or mildew. HE deter

gents are made to produce

the right amount of suds for the best perform

ance. Follow the

manufacturer’s instructions to determine the amount of detergent

to use. Remember, concentrated detergents such as 2x or higher

will

use less detergent based on load size.

Use only HE High Efficiency detergent.

1 ... 11 12 13 ... 52

Comments to this Manuals

No comments

Whirlpool W10192074B-SP Use and Care Guide Page 12

Comments to this Manuals

Related products and manuals for Washing machines Whirlpool W10192074B-SP