Whirlpool T-K1S User Manual download pdf (Page 6)

Installation

General

All gas water heaters require careful and correct

installation to ensure safe and efficient operation.

This manual must be followed exactly.

1. Read the For Your Safety section in the

beginning of this manual.

2. This unit is not capable of being used as a pool

or spa heater.

3. The regulator is preset at the factory. It is

computer controlled and should not need

adjustment.

4. Suitable for potable water heating only. Well

water or hard water may cause scale problems

that will not be covered by the manufacturer’s

warranty.

5. Maintain proper space for servicing. Install the

unit so that it can be connected or removed

easily.

6. Install so that the electrical power can be

switched off if necessary.

7. Avoid installing in an area with high levels of

dust, sand or debris. Particles may clog the air

vent, reduce fan function, or cause improper

combustion.

8. Do not install the unit where the exhaust vent

is pointing into any opening in a building or

where the noise may disturb your neighbors.

Accessories

Check that all the parts listed below were included

with the unit.

Electrical Connections

The T-K1S requires a 60 Hz 120 VAC electrical

power supply, and it should be properly grounded

in accordance with the most recent edition of the

National Electrical Code, ANSI/NFPA 70 and any

local codes. In Canada, all electrical wiring to the

heater should be installed in accordance with the

Canadian Electrical Code, CSA C22.1 Part 1, and

any local codes. Do not rely on the gas or water

piping to ground the metal parts of the heater.

CAUTION: Label all wires prior to disconnection

when servicing controls. Wiring error can cause

improper and dangerous operation. Verify proper

operation after servicing.

• A means for switching off the 120 VAC power

supply must be provided.

• Wire the heater exactly as shown in the wiring

diagram.

• A green screw is provided in the junction box

for the grounding connection.

Please keep this owner’s manual in a safe

place for future reference. Copies of this

manual are available from TAKAGI-USA

This section is for the installer. The installer

is responsible for the correct installation of

your Flash Water Heater.

For Your Safety

Only a certified and trained service

technician or qualified plumber may service

or install your product.

1 2 3 4 5 6 7 8 9 10 11 ... 25 26

Comments to this Manuals

No comments

Whirlpool T-K1S User Manual Page 6

Comments to this Manuals

Related products and manuals for Water boiler Whirlpool T-K1S