Whirlpool WHER25 User Manual

System tested and certified by NSF Internationalagainst NSF/ANSI Standard 42 and 58. See performance data sheet for details.7272844 (Rev. K 9/24/07)Pr

10Step 3: Install RO Filter Assembly

11FIG. 12Step 4 - Install Storage TankThe fitting on the supply tank may need to be tightened7-8 turns to get a good seal.Do not overtighten.INSTALL S

12SELECT LOCATION OF REVERSE OSMOSISFAUCET MOUNTING HOLEYou will need to select the location of the ReverseOsmosis Faucet. You have three options to

13

14Cut tubing square with end of tubing round,smooth, with no cuts, nicks or flat spots.Step 6 - Connect TubesQuestions? Visit www.ecodyne.org or call

15Step 6 - Connect TubesCONNECT YELLOW TUBE TO STORAGE TANK1. Locate the yellow tube. One end is attached to the ReverseOsmosis filter assembly. 2. Ru

16Step 7 - Sanitize, Test and Purge SystemSANITIZE THE SYSTEMSanitizing is recommended immediately after installa-tion of the Reverse Osmosis system.

17

18How Your RO Water System WorksHOW YOUR REVERSE OSMOSIS SYSTEMWORKSIntroduction: Your Reverse Osmosis (RO) DrinkingWater System uses your household w

19How Your RO Water System WorksFIG. 25PREFILTERPRODUCTWATERSTORAGERO MEMBRANEcheckvalvedrain flowcontrolAUTOMATICSHUTOFFWATERINPOSTFILTERPRODUCTWATER

2TABLE OF CONTENTSUnpack and Check Shipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20MaintenancePREFILTER/POSTFILTER MAINTENANCENOTE: It is recommended to replace the battery,prefilter and postfilter cartridges at least every 6months

21MaintenanceFIG. 27FLOW CONTROLThe flow control is vital for proper operation of theReverse Osmosis membrane cartridge. See Fig. 27. Theflow control,

22SpecificationsSupply water pressure limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-100 psi (

23WarrantyONE YEAR LIMITED WARRANTY ON REVERSE OSMOSIS DRINKING WATER SYSTEM(Except filter cartridges and R. O. membrane)Warrantor: Ecodyne Water Syst

24TroubleshootingQuestions? Visit www.ecodyne.org or call Toll Free 1-866-986-3223 Problem: Chlorine taste and/or odor in the RO product water.Cause:

25TroubleshootingQuestions? Visit www.ecodyne.org or call Toll Free 1-866-986-3223 Problem: Water leaking from faucet airgap hole.Cause: Drain side of

26Exploded ViewQuestions? Visit www.ecodyne.org or call Toll Free 1-866-986-3223

27Parts ListQuestions? Visit www.ecodyne.org or call Toll Free 1-866-986-3223 Key No. Part No. Description1 9006062 Screw (2 req’d)2 9041700 Hanger Wa

3Packing ListUnpack and Check Your CartonINSPECT SHIPMENTYour Reverse Osmosis Drinking Water System isshipped complete in one carton. Remove all items

4Plan Your InstallationFIG. 1PLAN YOUR INSTALLATIONIt is recommended to read through the entire manualbefore beginning your installation. Follow all s

5

6Overview and Site PreparationOVERVIEWThere are seven easy steps to installing your Drinking Water system. They are as follows:STEP 1 - Install Cold W

7Step 1 - Install Supply Water FittingQuestions? Visit www.ecodyne.org or call Toll Free 1-866-986-3223 FIG. 5Saddle Valve Connection(Included in pack

8Step 2 - Install RO Drain Under SinkFIG. 6FIG. 7FIG. 8INTRODUCTIONA suitable drain point is needed for the reject water fromthe Reverse Osmosis Filte

9Step 2 - Install RO Drain In Remote Location FIG. 10FIG. 9INSTALL A REMOTE DRAIN POINT AND AIR GAP (Remote Location)You can also run the drain tubin