Whirlpool 66121560A Use and Care Guide download pdf (Page 15)

To Set the Timer Delay

To set Timer to turn off the air conditioner (air conditioner

must be on):

1. Press TIMER. Timer indicator light on the air conditioner

control panel will flash.

2. Press the plus or minus button to change the delay time from

1 to 24 hours.

3. Press TIMER again or wait 10 seconds. Timer indicator light

on the air conditioner control panel will remain on.

To set Timer to turn on the air conditioner, keeping

previous settings:

1. Turn off the air conditioner.

2. Press TIMER. Timer indicator light on the air conditioner

control panel will flash.

3. Press the plus or minus button to change delay time from 1 to

24 hours.

4. Press TIMER again or wait 10 seconds. Timer indicator light

on the air conditioner control panel will remain on.

To set Timer to turn on the air conditioner, changing the

previous settings:

1. Turn on the air conditioner.

2. Adjust the mode to Cool, Fan, or Power Saver.

3. Adjust the fan speed to Turbo, High, Low, or Auto.

4. Adjust temperature between 64°F and 86°F (18ºC and 30ºC).

5. Turn off the air conditioner.

6. Press TIMER. Timer indicator light on the air conditioner

control panel will flash.

7. Press the plus or minus button to change delay time from 1 to

24 hours.

8. Press TIMER again or wait 10 seconds. Timer indicator light

on the air conditioner control panel will remain on.

Starting Your Air Conditioner—Rotary Control—Cool Only Models

1. Set vent control. See “Vent Control (on some models).”

2. Select the fan speed. See “Fan Speed.”

3. Set temperature. See “Temperature.”

Vent Control (on some models)

Set the Vent control to CLOSE for maximum continuous cooling.

The Vent control set to OPEN allows you to draw stale or smoky

air from the room.

■ Open—to exhaust room air to the outside.

■ Close—to circulate room air.

NOTE: The Vent control will function only when the Fan Speed is

operating.

Fan Speed

Set Fan Speed to the desired setting. When the air conditioner is

operating at Turbo Cool, High Cool, or Low Cool, the fan

circulates air continuously.

■ Turbo Cool—for maximum cooling

■ High Cool—for normal to maximum cooling (depending on

model)

■ Low Cool—for sleeping comfort

■ Fan Only—to move air continuously without cooling

Temperature

Turn the TEMPERATURE control to a mid-setting. Adjust the air

conditioner's performance by turning the Temperature control

clockwise for maximum cooling. For less cooling, turn the

TEMPERATURE control counterclockwise. Experiment to find the

setting that suits you best.

TIMER

AIR SWING

WARMER

COOLER

TEMPERATURE FAN SPEED

Wait three minutes before restarting

OFF

FAN

ONLY

LOW

COOL

HIGH

COOL

TURBO

COOL

OFF

FAN

ONLY

LOW

COOL

HIGH

COOL

TURBO

COOL

WARMER

COOLER

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 36 37

Comments to this Manuals

No comments

Whirlpool 66121560A Use and Care Guide Page 15

Comments to this Manuals