Whirlpool WLE 1015/1 Instruction for Use download pdf (Page 11)

• Install the appliance away from heat sources. Installation in a hot place, near heat sources

(radiators, cookers) or direct exposure to the sun will increase energy consumption and should

be avoided.

• If this is not possible, respect these minimum distances:

- 30 cm from coal or oil stoves;

- 3 cm from electric and/or gas cookers.

• For optimum operation, ensure:

- a space of at least 5 cm above the appliance;

- a distance of at least 4 cm from the rear wall;

- place other cabinets at a suitable distance from the appliance to allow at least some air

circulation

• Install the appliance level (adjust the front feet if necessary) in a dry and well-aired place.

• Clean the inside.

• Insert the accessories supplied.

Electrical connection

• The electrical connections must comply with the local regulations.

• Voltage and power input are specified on the rating plate inside the appliance.

• Regulations require the appliance to be earthed. The manufacturer declines any liability

for injury or damage resulting from failure to observe the above rules.

• If the plug and socket are not of the same type, have the socket replaced by a qualified

technician.

• Do not use extension leads or multi-adapters.

Electrical disconnection

It must be possible to electrically disconnect the appliance by unplugging it or by means of a

double-pole switch installed ahead of the socket.

INSTALLATION

1 2 ... 6 7 8 9 10 11 12

No comments

Whirlpool WLE 1015/1 Instruction for Use Page 11