Whirlpool AD35DSS1 User Manual download pdf (Page 4)

DEHUMIDIFIER USE

Setting the Controls (Control Types 1 and 2 Only)

Starting/Stopping the Dehumidifier

NOTE: Before turning on the dehumidifier, be sure that the

bucket is empty and fits all the way into the dehumidifier.

Control Type 1

NOTES:

■ Minimum operating temperature is 65ºF (18ºC) for model

AD25B.

■ Minimum operating temperature is 55ºF (13ºC) for model

AD25D.

Control Type 2

NOTE: Minimum operating temperature is 55ºF (13ºC).

1. Plug into a grounded 3 prong outlet.

2. To turn on dehumidifier, turn DRYNESS CONTROL clockwise.

IMPORTANT: If the Empty/Adjust Bucket light comes on, the

dehumidifier will not operate. Empty or adjust bucket.

3. To turn off dehumidifier, turn DRYNESS CONTROL

counterclockwise to OFF.

Empty/Adjust Bucket Light

If this light is on, the dehumidifier is not running. This light

indicates that you need to check:

■ If the bucket is full, empty and reinstall bucket.

■ If the bucket is not in position, remove the bucket and

reinstall. Make sure the bucket fits all the way into the

dehumidifier and the light is off, or dehumidifier will not run.

Fan Speed (Control Type 2 Models Only)

The Fan Speed controls fan operation

■ High—for faster moisture removal

■ Low—for quieter moisture removal

Dryness Control

The Dryness Control regulates the amount of moisture in the

room. Turn the control knob clockwise for more drying. Turn the

control knob counterclockwise for less drying. Turn the control

knob to “Dry” to maintain average humidity conditions.

NOTES:

■ For the first few days of use, turn the DRYNESS CONTROL

clockwise to CONTINUOUS RUN to remove extra moisture

from the furnishings as well as the room air.

■ For all models except AD25B, the Deicer will turn off the

compressor if a low temperature condition exists. Turning the

Dryness Control will not increase or decrease the amount of

moisture removed. Compressor operation will resume when

the low temperature condition no longer exists.

A. Light glows, indicating the bucket is full or is not in correct position.

B. Adjusts amount of moisture removed from room.

A. Light glows, indicating the bucket is full or is not in correct position.

B. Adjusts amount of moisture removed from room.

C. Selects fan speed.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments

Whirlpool AD35DSS1 User Manual Page 4

Comments to this Manuals

Related products and manuals for Air equipment Whirlpool AD35DSS1