Whirlpool AD35DSS1 User Manual download pdf (Page 7)

Option 2—Connect Drain Hose

If you plan to run your dehumidifier continuously, you may want

to attach a garden hose to the drain hose connector.

1. Use a flat-blade screwdriver to gently pry out the drain hose

connector cover. Discard the cover.

2. Remove bucket.

3. Attach a garden hose to drain hose connector on the inside of

the dehumidifier. Hand tighten.

4. Place the other end of garden hose into a floor drain. Check

to see that the hose lies flat and is in the drain.

5. Reinstall bucket.

NOTES:

■ To use the bucket without the garden hose, remove the

garden hose. Then reinstall bucket.

■ The bucket must be installed and properly aligned for the

dehumidifier to operate with or without a garden hose

connected.

Normal Sounds

When your dehumidifier is operating normally, you may hear

sounds such as:

■ Compressor sounds, which may be loud. This is normal.

■ Clicking sounds when the dehumidifier or compressor turns

off and on, and when the Automatic Shutoff Switch is

working.

■ Air movement from the fan.

A. Drain hose connector cover

B. Bucket

A. Garden hose

B. Drain hose connector

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

Whirlpool AD35DSS1 User Manual Page 7