Whirlpool HXC9.8AT User Manual download pdf (Page 12)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Antigrease and odour lter signal

Theantigrease(A)and/orodour(B)ltersneedcleaning/

replacing after a certain number of hours of use (the latter

forlteringhoodsonly).

The indicator light I1onindicatesthattheantigreaselter

is saturated, while the indicator light I2 on indicates that the

odourlterissaturated(forhoodsinlteringmodeonly).

Press T5 + T4 for 3 seconds with the hood on to reset the

counter.

Hood type setting

Thehoodcanbesettotheventilation(default)orltering

mode. To change the setting proceed as follows:

• withthehoodOFF, the menu is accessed by pressing the

T4 e T5 buttons for a prolonged time; this is signalled by

a sound emitted by the hood and by the I4 icon lighting

up and the writing C1-0 appearing on the display;

• usethebuttonsT4 and T5 to go through the menu. Use

T4 to go through the various menu items (C1, C2, C3,

C4, etc) and T5 to select them (0, 1 or 0, 1, 2);

• tosetthehoodtype,accessthemenu,selecttheitemC6 with

T4 and set the value 0 with T5 to set the hood on ventilation

modeor1forthelteringmode.PressT1 at the end.

Hood off

The hood can be turned off manually by pressing the T1

button (ON/OFF). If the hood stays on in manual mode, it

turnsoffautomaticallyafteracertain“safety”time.Ifthe

timer is set, the hood turns off automatically when the set

time runs out.

Models with Touch control glass + display

(high)

(Only available in certain models)

T1 T2 T3 T4 T5 T6 T7 T8

T1 motor ON/OFF

Whenthebuttonispressedwiththehoodoff,therstspeed

is set. When the button is pressed during operation, the

hoodswitchesOFF.

T2 Speed –

When the button is pressed the hood switches to the

previous speed.

T3 Speed +

When the button is pressed the hood switches to the next speed.

If the hood is off, speed 1 is set when pressing this button.

T4 Booster

When the button is pressed, the hood switches from the

previousstatustotheintensivespeed;theletter“b”willash

slowly on the display. The setting has a limited timeframe;

when the time elapses the hood goes back to the speed set

previously; when a speed button is pressed (T2, T3 or T4),

the selected speed is set as you leave the booster mode.

T5 AUTO

Press the T5 button to activate the automatic mode, which

turns the hood on based on the steam level detected. While

in normal operation the sensor regulates the motor speed

within the admitted values (0,1,2,3 or booster). The hood

switchesfromautomatictomanualmodewhentheBooster

or Speed button is pressed.

The sensor needs calibrating before use; for more

information please refer to paragraph “Calibration

procedure”

T6 Timer “–”

With the timer, a time can be set, after which the hood

turns OFF; if the timer is set and the speed is subsequently

changed by pressing T2, T3 or T4, the timer is deactivated.

Press the T6 button to decrease the previously set value

by 5 minutes.

T7 Timer “+”

Whenthebuttonispressedforthersttime,thetimerisset

to 5 minutes; this value is increased by 5 additional minutes

every time the button is pressed after that.

T8 lights ON/OFF

It turns the work lights of the hood on and off.

D1I1 D2 I5

I2 I4

D1: DGT Speed

D2: Assembly of 2 DGT Time

I1:GreaseFilterIndicator

I2:CarbonFilterIndicator

I4: Menu Indicator

I5: Timer Indicator

Antigrease and odour lter signal

The antigrease (A) and odour (B) lters need cleaning/

replacing after a certain number of hours of use (the latter

forlteringhoodsonly).

The indicator light I1onindicatesthatthegreaselteris

saturated, while the indicator light I2 on indicates that the

odour/carbonlterissaturated(forhoodsinlteringmode

only).

Press T5 + T6 for 3 seconds with the hood on to reset the

counter.

Automatic sensor calibration procedure

- Calibration: the calibration procedure must be carried

out in a clean environment to be effective; therefore, the

hob must be off during the calibration.

During the calibration procedure the AUTO button is on

and the AUTOwritingashesonthedisplay.

The sensor calibration may be automatic or manual

(“uponrequest”).Inbothcasesthecalibrationlasts:

• about1minuteforgashobs;

• about13minutesforinductionandelectrichobs.

- Automatic calibration: occurs when the hood is power

suppliedorafterselectingtheplanfromtheconguration

menu.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Whirlpool HXC9.8AT User Manual Page 12

Comments to this Manuals

Related products and manuals for Cooker hoods Whirlpool HXC9.8AT