Whirlpool HXQB9.8LTI User Manual download pdf (Page 13)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

- Manual calibration: (or upon request) is set in the

congurationmenu.Thisprocedureisadvised,andmay

be started, in case of malfunctioning of the sensor (which,

for example, may occur in case of blackout while cooking

or after a long time since the use).

 Forthemanualcalibration,proceedwiththestepsbelow:

• withthehoodOFF or in standby, the menu is accessed

by pressing the T6 and T7 buttons for a prolonged

time; this is signalled by a sound emitted by the hood

and by the I4 icon lighting up and the writing C1-0

appearing on the display;

• usethebuttonsT6 and T7 to go through the menu.

UseT6 to go through the various menu items (C1, C2,

C3, C4, etc) and T7 to select them (0, 1 or 0, 1, 2);

• forthemanualcalibration,accessthemenu,select

item C4 with T6 and set value 1 with T7. Then press

T1 and wait for the time suggested for the calibration.

Selecting the hob type: the type of hob (electric, induction,

gas) present under the hood is select upon installation. A

complete automatic calibration procedure is carried out

immediately after selecting the hob.

Important: do not force the calibration “upon request”

after selecting the hob as this activates automatically.

To select the hob, proceed as follows:

• withthehoodOFF or in standby, the menu is accessed by

pressing the T6 and T7 buttons for a prolonged time; this is

signalled by a sound emitted by the hood and by the I4 icon

lighting up and the writing C1-0 appearing on the display;

• usethebuttonsT6 and T7togothroughthemenu.Use

T6 to go through the various menu items (C1, C2, C3,

C4, etc) and T7 to select them (0, 1 or 0, 1, 2);

• toselectthehob,accessthemenu,selectitemC3 with

T6 and set the value with T7 to 0 if you have a gas hob,

1 if you have a radiant hob and 2 if you have an induction

hob. Press T1 to leave the menu mode and wait the time

needed for the sensor calibration.

Hood type setting

Thehoodcanbesetintheventilation(default)andltering

operating mode. To change the type proceed as follows:

• withthehoodOFF or in standby, the menu is accessed by

pressing the T4 and T5 buttons for a prolonged time; this is

signalled by a sound emitted by the hood and by the I4 icon

lighting up and the writing C1-0 appearing on the display;

• usethebuttonsT4 and T5togothroughthemenu.Use

T4 to go through the various menu items (C1, C2, C3,

C4, etc) and T5 to select them (0, 1 or 0, 1, 2);

• to set the hood type, access the menu, select the item

C6 with T4 and set the value 0 with T5 to set the hood on

ventilation mode or 1forthelteringmode.ThenpressT1.

Hood off

The hood can be turned off manually by pressing the T1 button

(ON/OFF). If the hood stays on in manual mode, it turns off

automaticallyafteracertain“safety”time.Ifthetimerisset,

the hood turns off automatically when the set time runs out.

The Automatic mode activates after 10 minutes from the

sensor turning off the hood motor.

Conguration table

Regulation

code

Meaning Explanation

C1 Greaseltertimer

It resets the grease

ltertimer

C2 Odourltertimer

Itresetstheodourlter

timer

C3 Hob type

It changes the hob type

fortheAUTOsensor.It

may be gas, electric or

induction

C4 Sensor calibration

It calibrates the sensor.

If item 1 is select, the

sensor carried out the

calibration the next

time the hood is turned

C5 Audio levels

Ifmute,noFBaudiois

emitted (not even when

turningON)

C5 Hood type

Ventilation/Filtering

(Ventilationbydefault)

C6

Reset to Factory

default

It resets the DGT menu

values to default values

(including installation)

General notes

If the display buttons become locked, unplug and plug

in again the hood from the mains before contacting the

Assistance Service.

Maintenance and care

Caution! Before cleaning or servicing the unit,

disconnect it from the mains by pulling the power plug

or disconnecting the main circuit breaker.

First cleaning

• Removetheprotectivelm

• Cleanwithadampspongeandalittleneutralsoap

• Rinseoffwithadampcloth

• Drywithasoftcloth;ifthehoodisstainlesssteel,dry

alongthemetal'sgrain

Periodic cleaning

The hood must be cleaned frequently (at least as often as

youservicethegreaselter),insideandout.Useadamp

cloth and a neutral liquid detergent with lukewarm water.

Do not use abrasive or corrosive products.

Warning:Failuretoobservethehoodcleaningandlter

cleaning/replacementinstructionscanresultinres.Follow

the instructions carefully. The manufacturer is not liable for

anydamagetothemotororrescausedbyincorrectcare

or failure to follow the above instructions.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Whirlpool HXQB9.8LTI User Manual Page 13

Comments to this Manuals

Related products and manuals for Cooker hoods Whirlpool HXQB9.8LTI