Whirlpool 8500 User Manual download pdf (Page 4)

Operating Instructions

Continued

CD Cn Cn

POTS & NORMAL RINSE

PANS LIGHT & HOLD

□□□

Starting your dishwasher

1. Push a Cycle Selector Button for the desired

cycle. Normal Wash and Light Wash Cycles

share the same button. The Cycle Control Knob

determines which cycle operates.

Cycle selector buttons

CD 1=1

AIR HEAT

□□

2. Push an Option Selector Button for each

desired option. The indicators above the buttons

will show which cycle and option(s) have been

selected.

Option selector buttons

Cycle control knob

3. Turn Cycle Control Knob clockwise to point to a

desired cycle. You will feel a definite stop at each

cycle mark. The dishwasher will automatically

start the cycle you selected.

NOTE: If the door is latched, you will hear cycles

start and stop as the knob passes each cycle

mark. This is normal and will not hurt the dish

washer. If you prefer, you can set cycles with the

door unlatched.

To add a dish after starting

1. To be sure the added item is washed and

rinsed, make sure the Cycle Control Knob has

not passed LIGHT WASH.

2. Lift up on the door latch to unlatch door and

stop the cycle. Don’t open the door until the

spray arms stop spinning.

3. Open the door and add the dish.

4. Close the door. Do not latch it. Wait 30

seconds for air in the dishwasher to warm up.

This helps reduce the amount of moisture that

can come from the vent when restarting the

cycle.

5. Press door in to latch it. The dishwasher will

start where it stopped.

1 2 3 4 5 6 7 8 9 ... 22 23

Comments to this Manuals

No comments

Whirlpool 8500 User Manual Page 4

Comments to this Manuals

Related products and manuals for Dishwashers Whirlpool 8500