Whirlpool ADG 190 A+ Instruction for Use download pdf (Page 49)

Filtering System

The filter prevents larger remnants of food or other objects from entering the pump.

Residue may block the filter so must be removed.

The filter system consists of a coarse filter,a flat filter (Main filter) and a microfilter (Fine filter).

Main filter 1

Food and soil particles trapped in this filter are

pulverized by a special jet on the lower spray arm and

washed down to drain.

Coarse filter 2

Larger items, such as pieces of bones or glass, that could

block the drain are trapped in the coarse filter. To

remove the items caught by the filter, gently squeeze the

tap on the top of this filter and lift it out.

Fine filter 3

This filter holds dirt and food residues in the sump area

and prevents it from being redeposited on the dishes

during wash cycle.

Filter assembly

The filter efficiently removes food particles from the

wash water, allowing it to be recycled during the cycle. For best performance and results, the filter must

be cleaned regularly. For this reason, it is a good idea to remove the larger food particles trapped in the

filter after each wash cycle by rinsing the semicircular filter and cup under running water. To remove the

filter device, pull the cup handle upwards.

• The dishwasher must never be used without the filters.

• Improper replacement of the filter may reduce the performance level of the appliance and damage

dishes and utensils.

WARNING:

STEP 1: Turn the filter anti clockwise, then lift it up.

STEP 2: lift the Main filter up.

STEP 3: lift the Fine filter up.

NOTE

When following this procedure from step1 to step 3, the filter

system will be removed; when following it from Step 3 to Step 1,

the filter system will be installed.

MAINTENANCE AND CLEANING

Open

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 63 64

No comments

Whirlpool ADG 190 A+ Instruction for Use Page 49