Whirlpool ADGI 851 FD Instruction for Use download pdf (Page 21)

Tension adjustment of the door spring

The door springs are set at the factory to the proper tension for the outer door.

If aesthetic wooden panel are installed, you will have to adjust the door spring tension.

Rotate the adjusting screw to drive the adjustor to strain or relax the steel cable (see figure 5).

Figure 5

Tension adjustment of the door spring.

Connection of drain hoses

Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making

sure to avoid bending or crimping it. The top of the hose must be less than 1000mm.

NOTE

The top of the hose must be

less than 1000mm.

Drain pipe

Counter

Front

PLEASE HANG UP THE DRAIN HOSE EITHER WAY OF A, B

Figure 6

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 30 31

No comments

Whirlpool ADGI 851 FD Instruction for Use Page 21