Whirlpool ADP 7570 IX Instruction for Use download pdf

EN -1-

Chart

BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!

5019 300 02947

FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER 30 SECONDS IF NO CYCLE HAS STARTED.

PROGRAM

SELECTION

BUTTON

Push “P” button

(repeatedly) until

selected program

number is shown

on the display

(P1...Px) - see

“Table of

programs” - next

page.

After 3 seconds

the cycle

remaining time is

displayed.

CANCEL/OFF

BUTTON

Push this button to

switch off the control

panel.

If pressed for 3 seconds

when a program is

running it cancels this

program. If pressed

for 3 seconds when

the dishwasher is off,

it drains the water out.

If pressed during

program and delayed

start selection it

cancels the selection

and returns to

previous cycle and

option selection.

ECO PROGRAM

INDICATOR

When lit, it indicates that

standard program is active.

MULTIZONE

INDICATOR

When lit, it indicates that

Multizone option is active.

KEYBOARD LOCK

INDICATOR

When lit, it indicates that

keyboard lock is active.

WATER TAP CLOSED

- Alarm

Blinks when there is no inlet

water or water tap is closed.

WASH TIME DISPLAY

Indicates the cycle duration and the remaining time (h:min). With “Delayed start”

selected it indicates the time remaining until program start: “h24” if above

10 hours delay time remain and “h:mm” if below 10 hours delay time remain.

If “Fx Ey” messages appears on the display, see page 9 - chapter “What to do if...”.

DELAY INDICATOR

When lit, it indicates that delay

is active.

SALT INDICATOR

When lit (at the end of the

cycle), the salt reservoir needs

to be refilled.

TABLET

SETTING

This setting allows

to optimize the

cycle

performances

according the type

of detergent used.

Push the Tablet

button (the

indicator lights up)

if you are using the

combined

detergents in

tablet.

If you are using

powder or gel

detergent, the

Tablet indicator on

the control panel

has to be off.

MULTIZONE

Allows you to choose

the washing zones.

Press this button

(repeatedly) to select

the wash zones:

KEYBOARD LOCK

This option allows you

to lock the buttons on

the control panel.

Children will not be

able to accidentally

start the dishwasher by

pressing the buttons on

the control panel when

this option is selected.

If you want to activate

this option hold down

the button for

3 seconds.

Repeat the same

operation to unlock the

panel.

both racks

2 indicator lights

only upper rack

(including cutlery

rack)

indicator lights

only lower rack

indicator lights

ANTIBACTERIAL

RINSE

This function activates an

antibacterial rinse at the end of

the wash cycle, guaranteeing a

further reduction of bacteria.

Press the button to activate or

deactivate the function. This

function can be used with the

programs indicated in the table of

programs. The dishwasher door

must be kept shut for the entire

duration of the program in order

to guarantee reduction of

bacteria. If the door is opened the

indicator lamp starts flashing.

DELAYED START

BUTTON

Push the button (repeatedly)

to delay the start of the

program. Adjustable from

0:30 to 24 hours. With each

press of the button, the

delay start increases by: 0:30

if selection below 4 hours,

1:00 if selection is below

12 hours, 4 hours if selection

is above 12 hours. If 24

hours reached, and the

button is pressed, the

delayed start is deactivated -

"OFF" message is shown.

Then press the START

button. The delay time can

be adjusted after Start key

press. The dishwasher will

start after the set time.

START/PAUSE/

RESUME

BUTTON

Push this button to

start the selected

program: the

indicator lights up

and goes off at the

end of the program.

Press Start button or

open the door

during washing cycle

to pause the cycle -

the Start Indicator

blinks.

To resume the cycle

push Start button

and close the door.

RINSE AID

INDICATOR

When lit (at the end of the

cycle), the rinse aid dispenser

needs to be refilled.

POWERCLEAN

Thanks to the additional

power jets this option

provides a more intensive and

powerful wash in the lower

rack, in the specific area.

Quick reference guide

Whirlpool is a registered trademark of Whirlpool USA

1 2 3 4 5 6 ... 11 12

Summary of Contents

Page 1 - 5019 300 02947

EN -1-ChartBEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!5019 300 02947FOR ENE

Page 2 - Table of programs

EN -10-What to do if...Crockery and cutlery... Possible causes... Solutions...are not perfectly clean/have food residues- Too little space between

Page 3 - Daily check

EN -11-What to do if...Crockery and cutlery... Possible causes... Solutions...have discoloured plastic parts - Tomato/Carrot juice. - Tomato sauce,

Page 4 - Daily use

EN -12-Precautions and general recommendations1. PackingThe packaging materials are 100% recyclable and marked with the recycling symbol .2. Removing

Page 5 - How to load the racks

EN -2-Chart1) Program data obtained under normal conditions and with default options on. Data may vary depending on ambient conditions and used option

Page 6 - D - OPEN

EN -3-First time use1- salt reservoir2- rinse aid dispenser3- detergent dispenser4- racks system5,6,7,8- available functions on the panel9- filters10-

Page 7 - How to use PowerClean

EN -4-Daily check3Daily useAdding detergent - Use only detergent specifically for dishwashers in accordance with the supplier’s recommendationsOpen th

Page 8 - Maintenance and care

EN -5-How to load the racks4Long tools can be loaded in the frontal part of the rack (if long tools do not fit in the cutlery rack they can be placed

Page 9

EN -6-How to load the racks4CLICK!Rotate the flapclockwise andhook on rackA - OPEN TO OPEN A:A - CLOSEDAABD - CLOSEDD - OPENIn the upper rack you can

Page 10 - What to do if

EN -7-How to load the racks4Arrange crockery so that water does not collect in cavities, ensuring that the spray arms turn freely. Only use dishwasher

Page 11

EN -8-7Switching off the appliance. Everything OK...Wash cycleSelect program68Maintenance and careMaintenance and careRectifying minor faults yourself

Page 12

EN -9-What to do if...If a fault occurs, before contacting the After-sales Service, make the following checks to try and remedy the problem.Most fault