Whirlpool ADPF 851 WH Instruction for Use download pdf (Page 13)

Wash Cycle Table

NOTE

•



Meaning: need to fill rinse into the Rinse-Aid

Dispenser.

• * This programme is the test cycle. The

information for comparability test in

accordance with EN 50242, as follows:

• Capacity: 10 setting;

• Position Upper basket: upper wheels on rails;

• Rinse aid setting: 6;

• Pl: 0.49w;

• Po: 0.45w.

STARTING A WASHING PROGRAMME

Program

Cycle selection

information

Description

of cycle

Detergent

pre/main

Running

time (min)

Energy

(Kwh)

Water

(l)

Rinse

Aid

Intensive

For heaviest soiled crockery,

and normally soiled pots

pans dishes etc with dried

on soiling.

Pre-wash (50°C)

Wash (65°C)

Rinse

Rinse (65°C)

Drying

5/22g

(or3in1)

135 1.3 16



Normal

For normally soiled loads,

such as pots, plates,glasses

and lightly soiled pans.

Pre-wash (45°C)

Wash (55°C)

Rinse

Rinse (65°C)

Drying

5/22g

(or3in1)

155 1.07 13



* EN 50242

This is standard programme,

it is suitable to clean

normally soiled tableware

and it is the most efficient

programme in terms of its

combined energy and water

consumption for that type of

tableware.

Pre-wash

Wash (50°C)

Rinse (60°C)

Drying

5/22g

(or3in1)

175 0.83 9.0



Glass

For lightly soiled loads, such

as glasses, crystal and fine

china.

Pre-wash

Wash (40°C)

Rinse

Rinse (60°C)

Drying

25g 110 0.7 13



1 Hour

For lightly soiled loads that

do not need excellent drying

efficiency.

Pre-wash (50°C)

Wash(60°C)

Rinse (55°C)

Drying

5/22g 60 0.85 9



Rapid

A shorter wash for lightly

soiled loads that do not

need drying.

Wash (40°C)

Rinse

Rinse (45°C)

20 g 40 0.45 10

Turning On the Appliance

Starting a cycle wash

1. Draw out the lower and upper basket, load the dishes and push them back.

It is commended to load the lower basket first, then the upper one (see the section entitled “Loading

the Dishwasher”).

2. Pour in the detergent (see the section entitled “Salt, Detergent and Rinse Aid”).

3. Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification of the

socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.

4. Close the door, press the ON/OFF Button, and the display will turn on.

5. Press the program Button , the wash program will be changed as follows direction:

Intensive->Normal->Eco->Glass->1 Hour->Rapid;

If a program is selected, the response light will light. Then press the Start/Pause button, the dishwasher

begins to start.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 26 27

Comments to this Manuals

No comments

Whirlpool ADPF 851 WH Instruction for Use Page 13

Comments to this Manuals

Related products and manuals for Dishwashers Whirlpool ADPF 851 WH