Whirlpool GC900QPPB User Manual download pdf (Page 8)

Raised Panel:

The outer section of panel must be ⁷⁄₃₂" (5.6 mm) thick to fit into

the trim. Use the dimensions shown when designing raised panel

sections.

Trimless Panel with Handle

Dimensions

Use these dimensions drawings to create a custom panel for use

without a trim kit. The panel should be ¹⁄₂" to ⁵⁄₈" (13 mm to

16 mm) thick.

NOTE: A thicker panel may need rounded front corners and a

cutout for access to the handle.

Installation

1. Remove the mounting screws attaching the foot pedal to the

compactor. Remove foot pedal.

2. Remove mounting screws attaching the toe guard to the

compactor. Remove toe guard.

3. Remove the mounting screws attaching the decorative panel

to the compactor. Remove decorative panel and discard

mounting screws.

4. Align the bottom of the custom panel with the bottom of the

drawer front.

5. Secure the panel from the back using four #8 x 1" wood

screws as shown.

6. Reinstall the toe guard using the existing screws and

¹⁄₂" washer. Then, reinstall the foot pedal.

A. Raised panel or decorative trim

B. Outer section of panel

⁵⁄₁₆"

(8 mm)

both sides

⁵⁄₁₆"

(8 mm)

¹³⁄₁₆

(60.5 cm)

⁷⁄₃₂"

(5.6 mm)

⁵⁄₈"

(37.2 mm)

¹⁄₄"

(32 mm)

23¹³⁄₁₆"

(60.5 mm)

15"

(38.1 mm)

A. Mounting screws

B. Foot pedal

A. Handle

B. Custom panel

C. Panel screw locations

D. Toe guard

E. Washer

F. Toe g uard s cr e w

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Whirlpool GC900QPPB User Manual Page 8

Comments to this Manuals

Related products and manuals for Dishwashers Whirlpool GC900QPPB