Whirlpool WGD5000DW Installation Guide download pdf (Page 20)

Rotate outer door

Rotate outer door 180º and set it back down on inner door.

Be certain to keep cardboard spacer centered between

doors. Reattach outer door panel to inner door panel so

handle is on the side where hinges were just removed. Insert

4 door screws.

Remove screws at top, bottom, and side of door (4 screws).

Keep door screws separate from hinge screws as they are

different sizes.

Remove screws from door

Attach door hinges

Reattach door hinges to dryer door so that the larger hole is

at the bottom of the hinge.

Holding door over towel on dryer, pry inner door and lift to

separate it from outer door.

NOTE: Do not pull on door seal or plastic door catches.

Separate inner from outer door

Remove door strike and door strike label from dryer cabinet.

Insert the door strike into hole where door strike label was

removed and secure with screw. Cover original door strike

hole with door strike label and press rmly into place.

Remove door strike and door

strike label

10.

Door strike labelDoor strike

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

No comments

Whirlpool WGD5000DW Installation Guide Page 20