Whirlpool LDE7800W1 Operations Instructions download pdf (Page 4)

EXHAUST SYSTEM REQUIREMENTS

1. CAUTION: FOR YOUR PERSONAL SAFETY DO NOT

5. Exhaust outlet at rear of the dryer is located as shown in

EXHAUST DRYER INTO A CHIMNEY, FURNACE COLD

Figure 2. Detailed instructions on spacing from side and

AIR DUCT OR ANY OTHER COMMON DUCT, ATTIC OR

rear clearances can be found in the section “Instructions for

CRAWL SPACE. ACCUMULATED LINT COULD BECOME

Recessed or Closet Installations.” lnformatron on minimurn

A FIRE HAZARD OR MOISTURE COULD CAUSE DAM-

spacing side to side and to the rear is also found on a label

AGE.

located on back panel.

DO NOT USE 3 INCH EXHAUST DUCT

2. You can get the parts you need for installation from

your l~hirlpool parts distributor or your local plumbing and

heating store.

3. We strongly recommend exhaustrng the dryer to the

outside to prevent large amounts of morsture and lint

from berng blown into the room.

4. If you cannot exhaust yout- dryer to the outside, use

Exhaust Deflector Kit LCK4000 available from your

Whirlpool dealer. See FIG. 1.

EXHAUST OUTLET LOCATION

(REAR OF DRYER)

FIGURE 2

6. We strongly recommend exhausting with 4 inch diameter

rigid METAL duct. We strongly recommend METAL flexible

duct if you use flexible duct. Flexible aluminum duct is

available from your Whirlpool dealer or parts distributor.

NEVER USE SMALLER THAN 4 INCH EXHAUST DUCT.

1 2 3 4 5 6 7 8 9 ... 15 16

No comments

Whirlpool LDE7800W1 Operations Instructions Page 4