Whirlpool ED26MM User Manual download pdf (Page 8)

Plan to remove and empty the storage bin:

If the Ice dispenser has not, or will not be used for a

week or more,

If a power failure causes Ice In the bin to melt and

freeze together,

If the ice dispenser

not used regularly.

1. Pull the coverrng panel out from the bottom and

2. Lift the signal arm so it clicks into the OFF position.

slrde it to the rear.

Ice con still be dispensed, but no more will be made.

Lift the front of the storage brn Pull it out

4 Empty the bin Use hot or worm water to melt the

the night light

uses a heavy-duty IO-watt bulb. It

ice If necessary

Never use anythlng sharp

to break

should last about 10,000 hours. When it burns out,

up Ice in the bin This con damage the bin and

purchase another from your dealer.

dispenser mechanrsm.

Night Light Switch

5 Wash with mild detergent. Rinse well.Do not use

harsh or abrasive cleansers or solvents.

6 When replacing the bin, make sure it is pushed in

all the way Push the signal arm down to the ON

position to restart ice production

Removing the freezer basket.. .

For proper air movement, keep the freezer basket

In place when the refrigerator is operating.

To remove the basket:

Slrde out to the stop.

Lrft the front to clear the stop.

Slide out the rest of the way.

To replace the basket:

Place basket on the slides.

Make sure the wire stops

clear the front of theslides

Slide basket in

J-

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

No comments

Whirlpool ED26MM User Manual Page 8