Whirlpool SAN 400 Instruction for Use download pdf (Page 14)

Maintenance and care

Switching the appliance off

During cleaning and maintenance it is necessary to

disconnect the appliance from the electricity supply:

It is not sufficient to set the temperature adjustment

knobs on

(appliance off) to eliminate all electrical

contact.

Cleaning the appliance

 The external and internal parts, as well as the rubber

seals may be cleaned using a sponge that has been

soaked in lukewarm water and bicarbonate of soda or

neutral soap. Do not use solvents, abrasive products,

bleach or ammonia.

 The removable accessories may be soaked in warm

water and soap or dishwashing liquid. Rinse and dry

them carefully.

 The back of the appliance may collect dust which can

be removed by delicately using the hose of a vacuum

cleaner set on medium power. The appliance must be

switched off and the plug must be pulled out before

cleaning the appliance.

Avoiding mould and unpleasant odours

 The appliance is manufactured with hygienic

materials which are odour free. In order to maintain an

odour free refrigerator and to prevent the formation of

stains, food must always be covered or sealed

properly.

 If you want to switch the appliance off for an extended

period of time, clean the inside and leave the door

open.

1 1

Defrosting the appliance

! Follow the instructions below.

Do not use objects with sharp or pointed edges to

defrost the appliance as these may damage the

refrigeration circuit beyond repair.

The refrigerator has an

automatic defrosting

function: water is ducted to

the back of the appliance

by a special discharge

outlet (see diagram) where

the heat produced by the

compressor causes it to

evaporate. It is necessary

to clean the discharge

hole regularly so that the

water can flow out easily.

Replacing the light bulb

To replace the light bulb in the refrigerator compartment,

pull out the plug from the electrical socket. Follow the

instructions below.

Access the light bulb by removing the cover as

indicated in the diagram.

Replace it with a similar light bulb within the power

range indicated on the cover (10 W, 15W or 25W).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Comments to this Manuals

No comments

Whirlpool SAN 400 Instruction for Use Page 14

Comments to this Manuals

Related products and manuals for Fridges Whirlpool SAN 400