Whirlpool SD 1711 V Instruction for Use download pdf (Page 19)

Troubleshooting

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.

Malfunctions:

The internal light does not illuminate.

The refrigerator do not cool well.

The food inside the refrigerator is

beginning to freeze.

The AIR fan does not rotate.

The motor runs continuously.

The appliance makes a lot of noise.

The back wall of the refrigerator unit is

covered in frost or droplets of water

There is water at the bottom of the

refrigerator.

Possible causes / Solutions:

 The plug has not been inserted into the electrical socket, or not far enough

to make contact, or there is no power in the house.

 The door do not close properly or the seals are damaged.

 The door are opened too frequently.

 The TEMPERATURE ADJUSTMENT knob is not in the correct position

 The refrigerator have been over-filled.

 The TEMPERATURE ADJUSTMENT knob is not in the correct position.

 The food is in contact with the back inside wall of the refrigerator.

 The AIR system is only activated automatically when it becomes necessary

to restore perfect operational conditions inside the refrigerator compartment.

 The door is not closed properly or is continuously opened.

 The outside ambient temperature is very high.

 The appliance has not been installed on a level surface (see Installation).

 The appliance has been installed between cabinets that vibrate and make

noise.

 The internal refrigerant makes a slight noise even when the compressor is

off. This is not a defect, it is normal.

 This shows the appliance is operating normally.

 The water discharge hole is blocked (see Maintenance).

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

No comments

Whirlpool SD 1711 V Instruction for Use Page 19