Whirlpool RB260PXY User Manual download pdf (Page 14)

USING YOUR OVEN

Adjusting the oven temperature control

Does your oven seem hotter or colder than your

old oven? The temperature of your old oven may

have shifted gradually without you noticing the

change. Your new oven is properly adjusted to

provide accurate temperatures. But, when

compared to your old oven, the new design may

give you different results.

If, after using the oven for a period of time, you

are not satisfied with the temperature settings,

they can be adjusted by following these steps:

Single/upper oven:

1. Push the Bake pad and hold for 4 seconds.

The display will show the current temperature

offset, for example “00” if you have not

previously adjusted the temperature.

2. To adjust the temperature, use the Temp

pad(s). Push A to raise the temperature or T

to lower the temperature in 5“F increments.

You can set the temperature change to as low

as -35"F or as high as +35®F. A minus (-) sign

will appear before the number when decreas

ing the temperature setting to show the oven

will be cooler by the displayed amount.

After making the desired adjustment, push

any command pad to enter the new offset

temperature.

Lower oven (double ovens):

1. Turn the Oven Temperature Control Knob to

the off position. Pull knob straight off and flip it

over.

2. Loosen the locking screws inside the control

knob. Note the position of the notches.

3. To lower the temperature, hold knob handle

firmly and move the tooth a notch counter

clockwise. Each notch equals about

5®F (2.5®C).

4. To raise the temperature, hold knob handle

firmly and move the tooth a notch clockwise.

Each notch equals about 5”F (2.5®C).

Tighten the locking screws and replace the

control knob.

Notches

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Comments to this Manuals

No comments

Whirlpool RB260PXY User Manual Page 14

Comments to this Manuals

Related products and manuals for Kiln Whirlpool RB260PXY