Whirlpool AKP 276/IX Instruction for Use download pdf (Page 10)

EN8

CONTROL PANEL DESCRIPTION

N.B.:

– Your product may appear slightly different from the drawing.

The knobs are retractable. Press the knobs in the middle and they pop up.

Your product may appear slightly different from the drawing.

1. Function selector knob

2. Electronic programmer

3. Thermostat knob

4. Red thermostat led.

HOW TO OPERATE THE OVEN

• Turn the selector knob to the required function.

The oven light switches on.

• Turn the thermostat knob clockwise to the required temperature.

The thermostat led lights up, switching off again when the oven reaches the selected temperature.

At the end of cooking, turn the knobs to “0”.

USING THE ELECTRONIC PROGRAMMER

Using the oven for the first time

Setting the time of day and the tone of the acoustic signal.

Upon connection of the oven to the mains power supply, AUTO and 0.00 flash on the display. To set the time of day, press buttons - and + at the same time: the central

dot flashes. Set the time of day using the buttons + and -. Having selected the desired value, press the middle button. The display shows “ton 1”. To select the desired

tone, press button –. Having selected the preferred tone, press the middle button. To change the time of day, proceed as described above.

Setting the timer

To set the timer, long-press the middle button: the display shows 0.00 and the bell symbol flashes. Set the timer using the button + (the maximum programmable

value is 23 hours and 59 minutes). The countdown begins after a few seconds. The display shows the time of day and the bell remains lit, confirming the timer has been

set. To view the countdown and change it if necessary, press the middle button again.

1. Button - : to decrease the value shown on the display

2. Button : for selecting the various settings:

a. Timer

b. Cooking time

c. Cooking end time setting

3. Button + : to increase the value shown on the display

A. The symbol

indicates that the timer function is in operation

B. The AUTO symbol confirms the setting has been made

2 31