Whirlpool AKZM 778/IX Instruction for Use

User and maintenance manualAKZM 788

GB8DESCRIPTION OF DISPLAYA. Display of heating elements activated during the various cooking functionsB. Time management symbols: timer, cooking time,

GB9FAST PREHEATING1. Turn the “Functions” knob to the symbol to select the fast preheating function.2. Confirm by pressing : the settings are shown

GB10TIMERThis function can be used only with the oven switched off and is useful, for example, for monitoring the cooking time of pasta. The maximum t

GB11Pizza1. Turn the Function knob to the symbol : the display shows “BREAD”. To select the “PIZZA” function, proceed as follows:2. Turn the “Browse”

GB12FUNCTION DESCRIPTION TABLEFUNCTION SELECTOR KNOBOFF To halt cooking and switch off the oven.LAMP To switch the oven interior light on/off.SPECIALS

GB13COOKING TABLESRecipe Function Preheating Shelf(from bottom)Temperature (°C)Time(min)Accessories Leavened cakesYes 2 / 3 160-180 30-90 Cake tin on

GB14Turkey / Goose 3 Kg Yes 2 190-200 80-130Drip tray or oven tray on wire shelfBaked fish / en papillote (fillet, whole)Yes 3 180-200 40-60Drip tray

GB15TESTED RECIPES (in compliance with IEC 60350:99+A1:05 +A2:08 and DIN 3360-12:07:07)The cooking table advises the ideal function and cooking temper

GB16How to read the cooking tableThe table indicates the best function to use for any given food, to be cooked on one or more shelves at the same time

Whirlpool is a registered trademark of Whirlpool, USAPrinted in Italy05/20115019 310 01285GB

GB1YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNTThis manual and the appliance itself provide important safety warnings, to be read and observed at all t

GB2After unpacking the oven, make sure that it has not been damaged during transport and that the oven door closes properly. In the event of problems,

GB3The oven does not work:• Check for the presence of mains electrical power and if the oven is connected to the electrical supply.• Turn off the oven

GB4REMOVING THE DOORTo remove the door:1. Open the door fully.2. Lift the catches and push them forwards as far as they will go (Fig. 1).3. Close the

GB5REPLACING THE OVEN LAMPTo replace the rear lamp (if present):1. Disconnect the oven from the power supply.2. Unscrew the lamp cover (Fig. 6), repla

GB6FOR ELECTRICAL CONNECTION, SEE THE PARAGRAPH ON INSTALLATION1. Control panel2. Upper heating element/grill3. Cooling fan (not visible)4. Dataplate

GB7INSERTING WIRE SHELVES AND OTHER ACCESSORIES IN THE OVEN The wire shelf and other accessories are provided with a locking mechanism to prevent thei