Whirlpool W7 OS4 4S1 H User's Guide download pdf (Page 7)

press when done. Once you have done all steps,

when required press

to activate the cleaning cycle.

Please note: It is reccommended to do not open the oven

door during the cleaning cycle to avoid a loss of water vapor

that could get an adverse eect on the nal cleaning result.

An appropriate message will start flashing on the

display once the cycle has finished. Leave the oven to

cool and then wipe and dry the interior surfaces with

a cloth or sponge.

• DRAIN

The drain function allows the water to be drained in

order to prevent stagnation in the tank. It is advisable

to always carry out draining every time the oven has

been used.

Anyway, after a certain number of cooking this action

will be mandatory and it will not possible start a

steam function before done it.

Once selected the “Drain” function

or when suggested from display,

press

and follow the actions

indicated: Open the door and place

a large jug under the drain nozzle

located at the bottom right of the

panel. Once started the draining,

keep the jug in position until the operation is

completed.

The display will indicate when the tank has to be

completely drained.

Please note: Drain can be selected only when the oven is cold.

• DESCALE

This special function, activated at regular intervals,

allows you to keep the boiler and the steam circuit in

the best condition.

The function is divided into several phases: draining,

descaling, rinsing. Once the function is started, follow

all the steps indicated on the display and press

when done to start each phase.

» DRAINING

Before descaling, it will be necessary to drain tank:

to perform the operation in the best way, proceed as

described in the relative paragraph.

» DESCALING

For best results in descaling, we recommend filling

the tank with a solution composed of 75 g of the

specific WPRO product and 1.7 litres of drinking

water.

WPRO descaler is the suggested professional product

for the maintenance of the best performance of

your steam function in the oven. Please follow the

instructions for use on the packaging. For orders and

information contact the after sales service or

www.whirlpool.eu

Whirlpool will not be held responsible for any

damage caused by the use of other cleaning products

available on the market.

Once the descaling phase has been completed, the

tank has to be drained.

» RINSING

To clean the tank and the steam circuit, rinse cycle

has to be done. Fill the tank with drinking water until

the display shows “TANK FULL”, then press

to start

the rinsing. At the end, the display will prompt to

repeat this phase by draining and rinsing again.

Do not turn off the oven until all the steps required

by the function have been completed.

Cooking functions cannot be activated during the

cleaning cycle.

Please note: A message will be shown on display, to remind

you to execute this operation regularly.

. MINUTEMINDER

When the oven is switched off, the display can be

used as a timer. To activate this function, make sure

that the oven is switched off and press

or : The

icon will flash on the display.

Press

or to set the length of time you require and

then press

to activate the timer.

MINUTE-MINDER

An audible signal will sound and the display will

indicate once the minuteminder has finished

counting down the selected time.

Please note: The minuteminder does not activate any of the

cooking cycles. Press

or to change the time set on the

timer; press

or to switch the timer o at any time.

Once the minuteminder has been activated, you can

also select and activate a function.

Press

to switch on the oven and then select the

function you require.

Once the function has started, the timer will continue

to count down independently without interfering

with the function itself.

Please note: During this phase, it isn’t possible to see the

minuteminder (only the

icon will be displayed), that will

continue counting down in background. To retrieve the

minuteminder screen press

to stop the function that is

currently active.

. KEYLOCK

To lock the keypad, press and hold for at least five

seconds. Do this again to unlock the keypad.

KEYLOCK

Please note: This function can also be activated during

cooking. For safety reasons, the oven can be switched o at

any time by pressing

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Whirlpool W7 OS4 4S1 H User's Guide Page 7

Comments to this Manuals

Related products and manuals for Ovens Whirlpool W7 OS4 4S1 H