Whirlpool WCC31430AW Installation Manual download pdf (Page 6)

3-Wire Cable from Home Power Supply

IMPORTANT: Use the 3-wire cable from power supply where

local codes permit connecting the frame-ground conductor to

the neutral (white) junction box wire.

1. Connect the 2 black wires together using the UL listed wire

connectors.

2. Connect the 2 red wires together using the UL listed wire

connectors.

3. Connect the green or bare cooktop cable wires to the white

(neutral) wire in the junction box using the UL listed wire

connectors.

4. Install junction box cover.

Complete Installation

1. Check that all parts are now installed. If there is an extra part,

go back through the steps to see which step was skipped.

2. Check that you have all your tools.

3. Dispose of/recycle all packaging materials.

4. Use a mild solution of liquid household cleaner and warm

water to clean cooktop before use. Dry thoroughly with a soft

cloth. For more information, see the “Cooktop Care” section

of the Use and Care Guide.

5. Read the “Cooktop Use” section in the cooktop Use and

Care Guide.

6. Reconnect power.

NOTE: If the cooktop does not work after turning on the power,

check that a circuit breaker has not tripped or a household fuse

has not blown. See “Troubleshooting” section in the Use and

Care Guide for further information.

If you need Assistance or Service:

Please reference the “Assistance or Service” section of the Use

and Care Guide or contact the dealer from whom you purchased

your cooktop.

A. Cable from home power supply

B. Red wires

C. Green (or bare) ground wire

from cooktop

D. 3-wire cable from cooktop

E. Junction box

F. Wh ite wi re (from home power

supply)

G. UL listed wire connector

H. Black wires

I. UL listed or CSA approved

conduit connector

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Whirlpool WCC31430AW Installation Manual Page 6

Comments to this Manuals

Related products and manuals for Ovens Whirlpool WCC31430AW