www.whirlpool.eu/register
10EXTERIOR SURFACESClean surfaces with a damp microbre cloth. If they are very dirty, add a few drops of pH-neutral deter-gent. Finish o with a dry
EN11Problem Possible cause SolutionThe oven or the burner will not switch on.Power cut.Disconnection from the mains electricity.Check for the presence
12 x290°C
EN1358155153082689559186058586055050585510510min 5min 5min 5
14= =x 2Manufacturer:WHIRLPOOL EMEA S.P.A.VIA CARLO PISACANE N.1,20016 PERO (MI), ITALY001400011107199Printed in Italy
2SAFETY INSTRUCTIONSIMPORTANT TO BE READ AND OBSERVEDBefore using the appliance read these safety instructions.Keep them nearby for future reference.T
EN3take air directly from the outside by means of a pipe with an inner cross section of at least 100 cm2; the opening must not be vulnerable to any ty
4Remove the nozzle using a 7 mm socket wrench.Screw the new injector in fully (diameter in hundredths of millimetre stamped on the injector), taking c
EN5The power cable must be long enough to connect the appliance, once tted in its housing, to the main power supply. Do not pull the power supply cab
6DECLARATION OF CONFORMITYThis appliance has been designed, constructed and distributed in compliance with the requirements of European Directives: GA
EN7PRODUCT DESCRIPTION1. Control panel2. Shelf guides (the level is indicated on the wall of the cooking compartment)3. Recess for roasting spit (i
8REMOVE THE LATERAL GRILLESToremove the side grilles, press down the grilles and lift them up as shown. Then, extract the grilles from their seats.To
EN9To switch o the turnspit turn back the relative knob to the icon, then turn it to the position. We suggest to preheat the oven for 5 minutes. At
Comments to this Manuals