Whirlpool 8ET8MTKXKT04 User Manual

TOP-MOUNT REFRIGERATORUse & Care Guide2302300

10Adjust the DoorsDoor ClosingYour refrigerator has two front adjustable rollers – one on the right and one on the left. If your refrigerator seems un

11Using the ControlsFor your convenience, your refrigerator controls are preset at the factory. When you first install your refrigerator, make sure th

12Ice Production Rate NORMAL Ice Production: The ice maker should produce approximately 8 to 12 batches of ice in a 24-hour period. If ice is not bei

13To Replace the Crisper(s) Cover:NOTE: Before reinstalling the cover, make sure the U-shaped reinforcement bar is reinstalled in the front edge of th

14FREEZER FEATURESYour model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with

15Can Racks and Door Bins(on some models)NOTE: Can racks may be purchased as an Accessory for some models.To Remove and Replace the Racks/Bins:1. Remo

16Do not allow the Stainless Steel Cleaner & Polish to come into contact with any plastic parts such as the trim pieces, dispenser covers or door

17TROUBLESHOOTINGTry the solutions suggested here first in order to avoid the cost of an unnecessary service call.Your refrigerator will not operate

18Off-taste or gray color in the ice (on some models) Are the plumbing connections new, causing discolored or off-flavored ice? Discard the first few

19Notes

2TABLE OF CONTENTSREFRIGERATOR SAFETY ...3Proper Disposal of Your Old Refrigerator...

WHIRLPOOL® REFRIGERATOR WARRANTY FULL ONE-YEAR WARRANTY ON REFRIGERATORFor one year from the date of purchase, when this refrigerator is operated and

3REFRIGERATOR SAFETYProper Disposal of Your Old RefrigeratorIMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abando

4INSTALLATION INSTRUCTIONSUnpack the RefrigeratorRemoving the Packaging Remove tape and glue from your refrigerator before using. To remove any rema

5Electrical RequirementsBefore you move your refrigerator into its final location, it is important to make sure you have the proper electrical connect

65. Using a grounded drill, drill a ¹⁄₄" (6.35 mm) hole in the cold water pipe you have selected.6. Fasten shutoff valve to cold water pipe with

74. Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the freezer door free from the cabinet.5. Remove the parts for the center h

8Style 1–Standard Door Door Removal &ReplacementDoor Swing Reversal (optional)A. Door Hinge Hole PlugA. Flat-Head Handle ScrewsB. Freezer HandleA.

9Style 2–Contour DoorDoor Swing Reversal (optional)3AA. 5/16" Hex-Head Hinge Screws 1-1A1-2A. Door Hinge Hole Plug2AA. Door StopB. Door Stop Scr