Whirlpool 8209797 Specifications download pdf (Page 5)

Recommended ground method

For your personal safety, this air conditioner must be grounded.

This air conditioner is equipped with a power supply cord having

a grounded 3 prong plug. To minimize possible shock hazard, the

cord must be plugged into a mating, grounded 3 prong outlet,

grounded in accordance with all local codes and ordinances. If a

mating outlet is not available, it is the customer's responsibility to

have a properly grounded 3 prong outlet installed by a qualified

electrical installer.

It is the customer's responsibility:

• To contact a qualified electrical installer.

• To assure that the electrical installation is adequate and in

conformance with National Electrical Code, ANSl/NFPA 70 -

latest edition, and all local codes and ordinances.

Copies of the standards listed may be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

Power Supply Cord

NOTE: Your unit's device may differ from the one shown.

A. Reset button

B. Test button

This room air conditioner is equipped with a power supply cord

required by UL. This power supply cord contains state-of-the-art

electronics that sense leakage current. If the cord is crushed, the

electronics detect leakage current and power will be

disconnected in a fraction of a second.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in

death, fire, or electrical shock.

To test your power supply cord:

1. Plug power supply cord into a grounded 3 prong outlet.

2. Press RESET (on some devices, a green light will turn on).

3. Press TEST (listen for click; Reset button will trip, and on

some devices, a green light will turn off).

4. Press and release RESET (listen for dick; Reset button will

latch, and on some devices, a green light will turn on). The

power supply cord is ready for operation.

NOTES:

• The Reset button must be pushed in for proper operation.

• The power supply cord must be replaced if it fails to trip when

the test button is pressed or fails to reset.

• Do not use the power supply cord as an off/on switch. The

power supply cord is designed as a protective device.

• A damaged power supply cord must be replaced with a new

power supply cord obtained from the product manufacturer

and must not be repaired.

• The power supply cord contains no user serviceable parts.

Opening the tamper-resistant case voids all warranty and

performance claims.

INSTALLATIONINSTRUCTIONS

"" ," " Co sdlio se '

the A

• Do not use sharp instruments, rubbing alcohol, flammable

fluids, or abrasive cleaners to remove tape or glue. These

products can damage the surface of your air conditioner.

• Handle air conditioner with care.

Excessive Weight Hazard

Use two or more people to move and install

air conditioner.

Failure to do so can result in back or other injury.

Remove packaging materials

• Remove and properly dispose of packaging materials.

Remove tape and glue residue from surfaces before turning

on the air conditioner. Rub a small amount of liquid dish soap

over the adhesive with your fingers. Wipe with warm water

and dry.

I. Locate providedbags ofscrews.

2. Placethetop channelon top ofthe airconditioner,liningup

theholesintop channelwiththe holeson top ofair

conditioner.

3. Using 2 - #8 x %" pan-head screws, attach top channel to air

conditioner.

1 2 3 4 5 6 7 8 9 10 ... 39 40

Comments to this Manuals

No comments

Whirlpool 8209797 Specifications Page 5

Comments to this Manuals

Related products and manuals for Split-system air conditioners Whirlpool 8209797