28
Your dryer is equipped with various automatic safety
functions. These enable failures to be detected in good
time and the safety system can react appropriately.
These failures are frequently so minor that they can be
removed within a few minutes.
TROUBLESHOOTING
GUIDE & AFTER-SALES
SERVICE
Problem Possible Cause Solution
DRYING TAKES TOO LONG
LAUNDRY IS NOT DRY ENOUGH
Selected programme not
optimum for type of laundry
• Select the programme
matching best the type of
laundry; refer to section
PROGRAMMES
Door lter or bottom
lterclogged
• Clean the lters according to
the instructions in section CARE
AND MAINTENANCE
Laundry too wet • Make sure that laundry is
spun with the maximum spin
speed before drying. If laundry
was spun with spin speed
below 800rpm, the water
tank mayget full during the
dryingprogramme.
The ambient temperature is
toohigh
• The ambient temperature is
ideal between 15 and 20°C.
If the ambient temperature is
higher, air the room.
“Schonen / Gentle option”
selected
• The “Schonen / Gentle option”
should only be selected with
small loads
Comments to this Manuals