Whirlpool AWM 8900 Instruction for Use download pdf (Page 7)

DRAINING RESIDUAL WATER

Draining Residual Water

Residual water should be removed:

•

before moving a washing machine (relocation),

•

when installing in areas prone to frost and

•

before removing the filter.

Before emptying the residual water, switch the

appliance off and unplug it from the mains socket Make

sure that the water has cooled before draining.

Turn the slot through 180°, so that the dot points to

the open lock. To do this, use the insert from the

detergent dispenser or a coin. The cover bends down to

the floor.

Remove the hose, place a low container underneath and

pull the cap from the hose.

Drain the residual water until no more flows out. Then

close the residual water emptying hose.

Put the hose in the cover, fold the cover up and close

the cover using the detergent dispenser insert or a coin.

The dot points to the closed lock.

Pour about 1 l of water into the detergent dispenser to

reactivate the ecosystem. You must also plug the mains

plug back into the socket-outlet.

Now you can fill the washing machine and run the

desired programme.

2/5

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Whirlpool AWM 8900 Instruction for Use Page 7