Whirlpool FRESH CARE 8212 Instruction for Use download pdf (Page 16)

User manual

DOOR  HOW TO OPEN IT IN CASE OF A FAILURE, TO TAKE OUT

YOUR LAUNDRY (if available on your model)

Switch o the washing machine and unplug it. Close the water tap.

Wait until the drum has stopped rotating. Never open the door while the drum is in motion.

Wait until water and laundry have cooled down when washing with high temperatures.

Always drain the water before opening the door.

Before opening the door as described in below section, refer

to failure “Door is locked with or without failure indication,

and the programme does not run”. The door may unlock by

itself after conditions like for example a power breakdown do

not persist anymore.

Only if the door cannot be opened as described in the section

mentioned before, proceed as described below. In case of a

power breakdown, the washing machine will proceed where

it was interrupted as soon as power is available again. If a

failure occurs on the washing machine and the door is locked,

but you must take out your laundry:

1. First drain the residual water, as described in section

“CLEANING & MAINTENANCE/ Draining residual water”.

2. Remove the screw with a screwdriver.

3. Then pull downwards the strap as indicated in the

following gure. You can now open the door and take out

your laundry.

4. Afterwards x the strap again by rmly turning in the

screw with the screwdriver.

5. Reinstall the plinth.

TRANSPORT AND HANDLING

Never lift the washing machine by holding it at the worktop.

1. Pull out the mains plug, and close the water tap.

2. Make sure that door and detergent dispenser are properly

closed.

3. Disconnect the inlet hose from the water tap, and remove

the drain hose from your draining point. Remove all rest

water from the hoses, and x them so that they cannot

get damaged during transport.

4. Ret the transport bolts. Follow the instructions for

removing the transport bolts in the “Installation Guide” in

reverse order.

Important: Do not transport the washing machine without

having xed the transport bolts.

1 2 ... 11 12 13 14 15 16 17 18 19

No comments

Whirlpool FRESH CARE 8212 Instruction for Use Page 16