Whirlpool WFCR75230 Use and Care Guide download pdf (Page 11)

1. Follow the instructions given in the

paragraph “Wash Only” to select and, if

necessary, customise the required programme.

2. Press “Drying settings” to select the

required drying mode. Two drying modes are

available: automatic or timer.

- Automatic drying with selectable levels:

In automatic drying mode, the washer dryer

machine dries the laundry until the set level of

dryness is reached. Pressing button “Drying

settings” once automatically selects the

highest drying level available for the selected

programme. Press the button again to reduce

the drying level.

The following levels are available:

Wardrobe

: laundry is completely dry and

ready to be put away in the wardrobe without

ironing.

Hanger

: laundry is left slightly damp to

minimise creasing. Garments must be hung to

air dry completely.

Iron

: garments are left reasonably damp to

make ironing easier.

- Timer drying mode:

Press button “Drying settings” repeatedly to

set timer drying mode. After cycling through all

the automatic drying levels, continue pressing

button “Drying settings” until the desired time

is displayed. Values from 210 to 30 minutes are

settable.

To wash a load of laundry larger than the

maximum permissible load for drying (see

the column “Max. load for drying cycle” in the

Programme chart), remove a few garments once

the drying cycle. Proceed as follows:

1. Follow the instructions given in the paragraph

“Wash Only” to select and, if necessary,

customise the required programme.

2. Do not include a drying cycle.

door and remove a few garments to reduce

the load. Now follow the instructions for “Dry

only”.

N.B.: always allow a cooling down period after

drying before opening the door.

When using the two preset cycles “Wash & Dry

45’” and “Wash & Dry 90’”, it is not necessary to

select and start a drying cycle.

Dry only

This function is used to simply dry a wet load

washed previously in the washer dryer or by

hand.

1. Select a suitable programme for the laundry

you want to dry (e.g. select cotton to dry wet

cotton laundry).

2. Press button “Dry only” to dry without a wash cycle.

3. Press “Drying settings” to select the required

drying mode. Two drying modes are available:

automatic or timer.

- Automatic drying with selectable levels:

In automatic drying mode, the washer dryer

machine dries the laundry until the set level of

dryness is reached. Pressing button “Drying

settings” once automatically selects the highest

drying level available for the selected programm

Press the button again to reduce the drying level.

The following levels are available:

Wardrobe

: laundry is completely dry and

ready to be put away in the wardrobe without

ironing.

Hanger

: laundry is left slightly damp to

minimise creasing. Garments must be hung to

air dry completely.

Iron

: garments are left reasonably damp to

make ironing easier.

- Timer drying mode:

Press button “Drying settings” repeatedly to

set timer drying mode. After cycling through all

the automatic drying levels, continue pressing

button “Drying settings” until the desired time

is displayed.

Values from 210 to 30 minutes are settable.

N.B.: always allow a cooling down period after

drying before opening the door.

5. USING THE CORRECT AMOUNT OF

DETERGENT. Pull out the tray and pour

detergent into the relative compartments

as described in “Detergent dispenser”. This is only

necessary when using a wash only or a wash

+ dry programme.

6. DELAYING THE START OF A PROGRAMME.

set a programme to start at a later time,

see the section “Options and Functions”.

7. STARTING A PROGRAMME.

Press the START/PAUSE button. The relative

indicator lamp illuminates, the door locks and

the door open

symbol extinguishes. To

change a programme while a cycle is in progress,

press START/PAUSE to pause the washer dryer

then select the required cycle and press START/

PAUSE again. To open the door while a cycle is in

progress, press START/PAUSE; the door may be

opened if the

symbol lights. Press the START/

PAUSE button again to resume the programme

from where it was paused.

Press and hold the button until the washer

dryer stops.

If the water level and temperature are low

enough, the door unlocks and may be opened.

The door remains locked if there is water in the

drum. To unlock the door, switch the washer

dryer on, select the

SPIN & DRAIN programme and

speed to 0. The water is emptied and the door

unlocks at the end of the programme.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Comments to this Manuals

No comments

Whirlpool WFCR75230 Use and Care Guide Page 11

Comments to this Manuals

Related products and manuals for Washing machines Whirlpool WFCR75230