Whirlpool 66121560A Use and Care Guide download pdf (Page 14)

Timer Delay

To set the Timer to turn off the air conditioner (the air

conditioner must be On):

1. Press TIMER. Timer indicator light will flash. Display will show

remaining hours before the air conditioner will turn off.

2. Press the plus or minus button to change the delay time from

1 to 24 hours.

3. Press TIMER again or wait 10 seconds. Timer indicator light

will remain on. Display will show the current room

temperature.

To set the Timer to turn on the air conditioner, keeping

previous settings:

1. Turn off the air conditioner.

2. Press TIMER. Timer indicator light will flash. Display will show

remaining hours before the air conditioner will turn on.

3. Press the plus or minus button to change the delay time from

1 to 24 hours.

4. Press TIMER again or wait 10 seconds. Timer indicator light

will remain on. Display will show current room temperature.

To set the Timer to turn on the air conditioner, changing

previous settings:

1. Turn on the air conditioner.

2. Adjust the mode to Cool, Fan Only, or Power Saver.

3. Adjust the fan speed to Turbo, High, Low or Auto.

4. Adjust temperature between 64°F and 86°F (18ºC and 30ºC).

5. Turn off the air conditioner.

6. Press TIMER. Timer indicator light will flash. Display will show

remaining hours before the air conditioner will turn on.

7. Press the plus or minus button to change delay time (1 to

24 hours).

8. Press TIMER again or wait 10 seconds. Timer indicator light

will remain on. Display will show current room temperature.

To clear Timer delay program:

NOTE: Air conditioner can be either on or off.

Press and hold TIMER for 3 seconds. Timer indicator light will

turn off.

To see or change the time remaining (in hours):

1. Press TIMER once after it has been programmed. Display will

show remaining time.

2. While the display is showing the remaining time, you can

press the plus or minus button to increase or decrease the

time.

3. After 10 seconds, display will show the current room

temperature.

Using the Remote Control

NOTE: Remote control may vary in appearance.

NOTE: Two AAA batteries (included) power the remote control.

Replace batteries after 6 months of use, or when the remote

control starts to lose power.

To Turn the Air Conditioner On or Off

Press POWER.

To Select the Mode

Press COOL, FAN, or POWER SAVER.

To Select the Fan Speed

Press FAN SPEED for Turbo, High or Low or Auto.

NOTE: Auto fan speed cannot be selected in Fan Only mode.

To Set the Temperature

To raise the temperature:

Press the plus button to raise the temperature. Each time you

press or hold the plus button, the temperature will go up 1º to a

maximum temperature of 86°F (30°C).

To lower the temperature:

Press the minus button to lower the temperature. Each time you

press or hold the minus button, the temperature will go down 1º

to a minimum temperature of 64°F (18°C).

SPEED

COOL

FAN

SWING

TIMER

POWER

Power saver

POWER

FAN

COOL

Power saver

SPEED

FAN

AUTO

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 36 37

Comments to this Manuals

No comments

Whirlpool 66121560A Use and Care Guide Page 14

Comments to this Manuals