Whirlpool 11-0086-11 Owner's Manual download pdf (Page 55)

TROUBLESHOOTING cont...

System hasn’t detected any current change

when turning on or off ber box.

• Make sure ber box is connected properly.

• Manually change the output status (on/off)

of ber box and cycle through all possible

speeds.

• Reset spa pack.

• If error does not clear, call your local dealer

and schedule a service call.

System hasn’t detected any current change

when turning the fan ON or Off.

• Make sure the fan is connected properly.

• Manually change the output status (on/off).

• Reset spa pack.

• If error does not clear, call your local dealer

and schedule a service call.

System relearn error

• Every time a low-level option is changed, the

system must “relearn” currents associated to

each output/load. During this learning process,

the device connected to OUT8 (direct output,

no relay) must be disconnected if it draws

more than 0.4 amp. If it doesn’t, system will

report a SC error code.

• Once the load is correctly disconnected, user

needs to restart the learning process by

pressing either Select or Change key on the

in.xm display panel (in.scan interface).

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 65 66

No comments

Whirlpool 11-0086-11 Owner's Manual Page 55