Whirlpool AD50GUSB Use and Care Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 22
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
Setting the Controls
90% Relative Humidity.
80% Relative Humidity.
DEHUMIDIFIER USE
Control Panel
Starting/Stopping the Dehumidifier
NOTES:
Before turning on the dehumidifier, be sure that the bucket
is empty and fits all the way into the dehumidifier.
Each time you unplug the dehumidifier or power is interrupted,
the controls will return to the previous settings when power is
restored.
NOTES:
The control panel of your model may differ from the one shown above.
Minimum operating temperature is 38
(3
ºF
ºC)
Humidity displayed is between 30% Relative Humidity and
Humidity can be adjusted between 30% Relative Humidity and
Electric Shock Hazard
Plug into a grounded three-prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire or electric shock.
WARNING
5
1. Plug into a grounded three-prong outlet.
2. Press POWER to turn on the dehumidifier.
3. Press FAN to choose the fan speed.
4. Press MODE to choose the mode.
5.
Press the plus or minus button to choose the level
of humidity.
6. Press POWER to turn off the dehumidifier.
NOTE: The dehumidifier will retain your
last settings.
WATER FULL Light
If this light is on, the dehumidifier is not running. This light
light indicates that you need to check:
If the bucket is full, empty and reinstall bucket.
If the bucket is not in position, remove the bucket and
reinstall it. Make sure the bucket fits all the way into the
dehumidifier and the light is off, or dehumidifier and the
the heat modes will not run.
Fan Speed
1. Press FAN to select fan speed.
2. Choose Low, High or Auto.
Low
Will reach the desired humidity setting slower with
lower sound level.
High—Will reach the desired humidity setting faster.
Auto
Will provide the maximum humidity control by automatically
adjusting the fan speed.
AUTO
NORMAL
CONTINUOUS
AUTO
WATER FULL
POWER
MODE
TIMER
FAN
FILTER MONITOR
HIGH
LOW
H E AT
PUMP
IONIzER
PP
PUMP, HEAT, IONIZER button may not be displayed on the
panel, if your model does not have these functions.
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 21 22

Comments to this Manuals

No comments