Whirlpool ADP 941/2 WH Instruction for Use download pdf (Page 7)

45

Refer to the separate installation instructions

booklet.

Water inlet and drain:

• Strictly follow local Water Board regulations.

• Make sure the inlet and drain hoses are kink-

free and are not crushed.

• If the hose length does not suffice, replace

with similar hoses obtained from your local

dealer or our After-Sales Service.

• The inlet hose must be securely clamped to

the water tap to prevent leaks.

• The inlet water temperature varies according

to the model installed: inlet hose marked

“25 °C max.”: maximum temperature 25 °C

All other models: maximum temperature 60°C.

• When installing the appliance, make sure the

drain water discharges correctly and, if

necessary, remove the wire gauze from the

sink siphon.

• Secure the drain hose with a clamp to the

siphon to prevent it from dropping off during

operation.

• For appliances with water-stop system only:

if the water connections are made correctly,

the water-stop system safeguards your home

against damage caused by flooding.

Electrical connections:

• Closely adhere to local Electricity Board

regulations.

• Voltage information is shown on the rating

plate mounted inside the door on the right

hand side.

• The appliance must be earthed as prescribed

by law.

• Do not use extension leads or multiple

adapters etc.

• Before carrying out maintenance, disconnect

the mains plug.

• Do not use the dishwasher if it has been

damaged in transit. Consult your local retailer

or our After-Sales Service.

• The power cable must only be replaced by a

qualified technician.

CONNECTIONS

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments