Whirlpool AGB 668/WP Instruction for Use download pdf (Page 23)

Once the cycle has started, the wash cycle led indicator

light

turns on. If the hood is lifted during the cycle,

the program stops and resets itself; lower the hood again

to restart the cycle.

Once the program has finished, the wash cycle led

indicator light

turns off.

Lift the hood and remove the rack.

6.6 Total drainage at the end of the day

Total drainage at the end of the day (models with

drain pump)

Turn the machine off by pressing the on/off

button, lift the hood, remove the overflow and hold

down the drain pump button

until the tank has

been emptied.

In order to reactivate the machine it is therefore

necessary to place the overflow back into the tank,

lower the hood and press the on/off

button.

Otherwise, if finished using the machine, deactivate the

general wall switch.

Total drainage at the end of the day (models

without drain pump)

Turn the machine off by pressing the on/off

button, lift the hood, remove the overflow and wait for

the tank to empty completely. Place the overflow back

into the tank and lower the hood. Deactivate the

general wall switch.

Do not turn off the dishwasher while water is still in the tank. Always drain it first. When finished using

the machine, after having performed the final drainage, turn the machine off by pressing the on/off

button, deactivate the wall switch and turn off the water interception faucet. Do not leave the

machine on, inactive and unutilized for long periods of time.

1 ... 22 23 24 ... 73

No comments

Whirlpool AGB 668/WP Instruction for Use Page 23