Whirlpool DU900 User Manual download pdf (Page 13)

Option Selections

You can customize your cycles by pressing an option. If you

change your mind, press RESET to turn the option off. Select a

different option if desired.

You can change an option anytime before the selected option

begins. For example, you can press an unheated drying option

any time before drying begins.

After a wash cycle, the dishwasher remembers the options used

and uses the same options in the next wash cycle, unless you

select new options or press Reset.

Hi-Temp Wash

Select this option to heat the water to 140°F (60°C) in the main

wash. This option adds heat and wash time. Heating the water

helps improve washing results.

NOTE:

The Pots & Pans cycle automatically uses this option. Hi-

Temp Wash is an option with the Heavy and Normal Wash cycles.

This option does not work with Light Wash cycles (on some

models).

Air Dry

Select this option to dry dishes without heat and save energy.

The dishes take longer to dry and some spotting can occur.

For best drying, use a liquid rinse aid. Some items (such as

plastics) may need towel drying.

NOTE:

The dishwasher automatically heats the air in the

dishwasher during the “dry” portion of the cycle unless you

select Air Dry.

Reset Options

Select this option to change an option setting.

You can change option settings anytime during a cycle as long as

the cycle has not passed the point where the option is used. For

example, you can press Air Dry anytime before the Cycle Control

knob reaches Dry.

Press RESET.

Press 1 or more options.

Delay Hours

Use Delay Hours to run your dishwasher at a later time or during

off-peak hours. You can add items to the load anytime during the

delay countdown. After adding items, close the door firmly until it

latches. The delay countdown will not continue if the door is not

latched.

To delay the start

Close the door.

Select a wash cycle and option(s).

Turn the Cycle Control knob clockwise to the number of

hours you want the dishwasher to delay the start.

NOTES:

■

To cancel the delay, turn the Cycle Control knob to the

desired cycle.

■

Rinse Only and the Normal Wash cycles cannot be delayed.

Drying System

During drying, you can see steam escaping through the vent at

the upper left corner of the door. This is normal as the heat dries

your dishes.

IMPORTANT:

The vapor is hot. Do not touch the vent

during drying.

Overfill Protection Float

The overfill protection float (in the front right corner of the

dishwasher tub) keeps the dishwasher from overfilling. It must be

in place for the dishwasher to operate.

Check under the float for objects that may keep the protector

from moving up or down.

HI-

TEMP

WASH

AIR DRY

1 ... 12 13 14 ... 40

Comments to this Manuals

No comments

Whirlpool DU900 User Manual Page 13

Comments to this Manuals

Related products and manuals for Dishwashers Whirlpool DU900