Whirlpool MDW1495BI Instruction for Use

Browse online or download Instruction for Use for Dishwashers Whirlpool MDW1495BI. Whirlpool MDW1495BI Instruction for Use User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
GB
-1-
Chart
PROGRAMS
SELECTION
BUTTON
Push “Programs” button
(repeatedly) until the
indicator of the required
program lights up (see
“Table of programs” -
next page).
BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!
MULTIZONE
Allows you to choose the
washing zones. Press this
button (repeatedly) to
select the wash zones:
both racks
only lower rack
only upper rack
(including
cutlery rack)
- indicator lits
DELAYED START
BUTTON
Push the button
(repeatedly) to delay the
start of the program.
Adjustable from 1 to 24
hours. With each press of
the button, the delayed
start indicator increases
by one hour and after 24
restarts from 0. Then
press the START button.
The dishwasher will start
after the set time.
5019 996 01511
JET CLEAN
Thanks to the additional
power jets this option
provides a more intensive
and powerful wash in the
lower rack, in the specific
area. This option is
recommended for
washing pots and
casseroles (see page 7).
Press this button to
activate JET Clean (the
indicator lights up).
TABLET SETTING
This setting allows to
optimize the cycle
performances according
the type of detergent
used. Push the Tablet
button for 3 seconds (until
the indicator lights up) if
you are using the
combined detergents in
tablet (rinse aid, salt and
deteregent in 1 dose). If
you are using powder
detergent or liquid
detergent, the Tablet
indicator on the control
panel has to be off.
THE CONTROL PANEL OF THIS DISHWASHER ACTIVATES PUSHING ANY BUTTON EXCEPT CANCEL/OFF BUTTON.
FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER 30 SECONDS IF NO CYCLE HAS STARTED.
START/RESUME
BUTTON
Push this button to start
the selected program: the
indicator lights up and
goes off at the end of the
program.
When the door is opened
during a washing cycle, the
cycle is temporarily
paused: the Start indicator
blinks.
To resume the cycle push
Start button and close the
door within 3 seconds.
CANCEL/OFF
BUTTON
Push this button to switch
off the control panel.
If pressed when a
program is running it
cancels the program
ongoing draining water for
1 minute (0:01 is shown
into the display).
If pressed when the
dishwasher is switched
off, it drains any possible
liquids from dishwasher
(1 minute process).
RINSE AID INDICATOR
When lit (at the end of the
cycle), the rinse aid
dispenser needs to be
refilled.
SALT INDICATOR
When lit (at the end of the
cycle), the salt reservoir
needs to be refilled.
WASH TIME DISPLAY
Indicated the cycle duration and the remaining time (h:min). With
“Delayed start” selected it indicates the time remaining until program
start (h.00) - below 1h (0:min).
If “Fx Ey” messages appears on the display, see page 9 - chapter
“What to do if...”.
OPERATION
INDICATOR
A LED light projected
on the floor indicates
that the dishwasher is working.
Quick reference guide
Page view 0
1 2 ... 12

Summary of Contents

Page 1 - 5019 996 01511

GB -1-ChartPROGRAMS SELECTION BUTTONPush “Programs” button (repeatedly) until the indicator of the required program lights up (see “Table of programs”

Page 2 - Table of programs

GB -10-What to do if...Crockery and cutlery... Possible causes... Solutions...are not perfectly clean/have food residues- Too little space between

Page 3 - Daily check

GB -11-What to do if...Crockery and cutlery... Possible causes... Solutions...have discoloured plastic parts- Tomato/Carrot juice. - Tomato sauce,

Page 4 - Daily use

GB -12-Precautions and general recommendations1. PackingThe packaging materials are 100% recyclable and marked with the recycling symbol .2. Removing

Page 5 - How to load the racks

GB -2-Chart1) Program data obtained in conformity with European standard EN 50242, obtained under normal conditions (without additional options) and m

Page 6

GB -3-First time use1- salt reservoir2- rinse aid dispenser3- detergent dispenser4- racks system5,6,7,8- available functions on the panel9- filters10-

Page 7

GB -4-Daily check3Check the rinse aid indicator to check the level into the dispenser.(depending on the model)Rinse aid indicator on the control panel

Page 8 - Maintenance and care

GB -5-How to load the racks4A - Two trays to load cutleryPosition 1 Position 2This positions is ideal to load both cutlery, and long tools.Adjust the

Page 9

GB -6-How to load the racks4D - CLOSEDD - OPENYou can load dishes up to Ø 20 cm in the upper rack ONLY if the rack is in lower position (see below how

Page 10 - What to do if

GB -7-How to load the racks4Arrange crockery so that water does not collect in cavities, ensuring that the spray arms turn freely. Only use dishwasher

Page 11

GB -8-Switching off the appliance. Everything OK...Wash cycleSelect program678Maintenance and careMaintenance and careRectifying minor faults yourself

Page 12

GB -9-What to do if...If a fault occurs, before contacting the After-sales Service, make the following checks to try and remedy the problem.Most fault

Comments to this Manuals

No comments