Whirlpool ARC 103 AP Instruction for Use Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 11
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
16
BEFORE USING THE APPLIANCE
SAFEGUARDING THE ENVIRONMENT
Your new appliance is designed exclusively for
domestic use.
To get the most out of your new appliance,
read the user handbook carefully. It
contains a description of the appliance as
well as useful tips.
Keep this handbook for future consultation.
1. After unpacking the appliance, make sure that
it is undamaged and that the doors close
correctly. Any damage must be reported to the
dealer within 24 hours of delivery of the
appliance.
2. Wait at least two hours before switching the
appliance on, to ensure that the refrigerant
circuit is fully efficient.
3. Installation of the appliance and electrical
connections must be carried out by a qualified
electrician, in accordance with the
manufacturer's instructions and local safety
regulations.
4. Clean the inside of the appliance before use.
1. Packaging
The packaging material is 100% recyclable and
carries the recycling symbol . Follow local
regulations for scrapping.
Keep packing materials (plastic bags,
polystyrene parts, etc.) out of the reach of
children, as they are a potential source of
danger.
2. Scrapping/Disposal
The appliance is manufactured using recyclable
material.
This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE).
By ensuring that this appliance is scrapped
suitably, you can help prevent potentially
damaging consequences for the environment
and health.
The symbol on the appliance, or on the
accompanying documents, indicates that this
appliance should not be treated as domestic
waste but must be taken to a special collection
centre for the recycling of electrical and
electronic equipment.
When scrapping the appliance, make it unusable
by cutting off the power cable and removing the
doors and shelves so that children cannot easily
climb inside and become trapped. Scrap the
appliance in compliance with local regulations on
waste disposal, taking it to a special collection
centre; do not leave the appliance unattended
even for a few days, since it is a potential source
of danger for children. For further information
on the treatment, recovery and recycling of this
product, contact your competent local office,
the household waste collection service or the
shop where you purchased the appliance.
Information:
This appliance does not contain CFCs.
The refrigerant circuit contains R134a (HFCs) or
R600a (HCs), see the rating plate inside the
appliance.
Appliances with isobutane (R600a): Isobutane is
a natural gas of low environmental impact.
Caution is required, however, since isobutane is
flammable. Therefore, ensure that refrigerant
circuit pipelines are not damaged.
Declaration of conformity
This product has been designed for preserving
food and is manufactured in compliance with
Regulation (CE) No. 1935/2004.
This product has been designed, manufactured
and marketed in compliance with:
the safety objectives prescribed in the Low
Voltage Directive 2006/95/CE (which
replaced Directive 73/23/CEE as amended);
the protection requirements of the “EMC”
89/336/CEE directive, amended by Directive
93/68/CEE
Electrical safety of the appliance can only be
guaranteed if it is correctly connected to an
approved earthing system.
16
delivers potable water only, with mains
water pressure between 0.17 and 0.81
MPa (1.7 and 8.1 bar).
Do not store explosive substances
such as aerosol cans with a flammable
propellant in this appliance.
Do not swallow the contents (non-
toxic) of the ice packs (provided with
some models). Do not eat ice cubes or
ice lollies immediately after taking them
out of the freezer since they may cause
cold burns.
For p
roducts designed to use an air
filter inside an accessible fan cover, the
filter must always be in position when
the refrigerator is in function.
Do not store glass containers with
liquids in the freezer compartment
since they may break. Do not obstruct
the fan (if included) with food items.
After placing the food check that the
door of the compartments closes
properly, especially the freezer door.
Damaged g
askets must be replaced
as soon as possible.
Use the refrigerator compartment
only for storing fresh food and the
freezer compartment only for storing
frozen food, freezing fresh food and
making ice cubes.
Avoid storing unwrapped food in
direct contact with internal surfaces of
the refrigerator or freezer
compartments.
Appliances could have special
compartments (Fresh Food
Compartment, Zero Degree Box, etc.).
U
nless specified in the specific booklet
of product, they can be removed,
maintaining equivalent performances.
C-Pentane is used as blowing agent
in the insulation foam and it is a
flammable gas.
INSTALLATION
The appliance must be handled and
installed by two or more persons - risk
of injury. Use protective gloves to
unpack and install - risk of cuts.
Installation, including water supply
(if any) and electrica
l connections, and
repairs must be carried out by a
qualified technician. Do not repair or
replace any part of the appliance unless
specifically stated in the user manual.
Keep children away from the
installation site. After unpacking the
appliance, make sure that it has not
been damaged during transport. In the
event of problems, contact the dealer
or your nearest After-sales Service.
Once installed, packaging waste (plastic,
styrofoam parts etc.) must be stored
out of reach of children - risk of
suffocation. The appliance must be
disconnected from the power supply
before any installation operation - risk
of electric shock. During installation,
make sure the appliance does not
damage the power cable - risk of fire
or electric shock. Only activate the
appliance when the installation has
been completed.
Be careful not to damage the floors
(e.g. parquet) when moving the
appliance. Install the appliance on a
floor or support strong enough to take
its weight and in a place suitable for its
size and use. Make sure the appliance is
not near a heat source and that the
four feet are stable and resting on the
floor, adjusting them as required, and
check that the appliance is perfectly
level using a spirit level. Wait at least
two hours before switching the
appliance on, to ensure that the
refrigerant circuit is fully efficient.
WARNING: To avoid a hazard due
to instability, positioning or fixing of the
appliance must be done in accordance
with the manufacturer instructions. It is
forbidden to place the refrigerator in
such way that the metal hose of gas
stove, metal gas or water pipes, or
electrical wires are in contact with the
refrigerator back wall (condenser coil).
All dimensions and spacing needed for
installation of the appliance are in the
Installation instruction booklet.
Page view 1
1 2 3 4 5 6 7 ... 10 11

Comments to this Manuals

No comments