Whirlpool ED22DQ Specifications download pdf (Page 11)

Adjusting the EZ-TRACK* refrigerator shelf

The EZ-TRACK shelf slides from side to side for more

flexible storage in your refrigerator.

To slide shelf side to side:

1. Lift slightly on shelf front.

2. Slide to desired location.

3. Lower shelf front to level position.

NOTE: You do not have to remove small items from

the shelf before moving it side to side. You may need

to remove larger items.

Lift front slightly then slide to new location.

To remove the shelf:

1. Remove all items from the shelf.

2. Hold back of shelf with one hand.

3. Lift front of shelf to 45° angle,

4. Lower shelf slightly to release shelf from upper

channel of track. Then pull shelf straight out.

NOTE: Shelf is heavy. Make sure you use both

hands when removing shelf.

To remove shelf track:

1. Lift both sides of track slightly.

2. Pull track straight out.

Upper channel

Hold with both hands and lift front to 45 ° angle.

Hold both sides and lift up and out.

To replace shelf track:

1. Guide track hooks into the shelf support slots on

the back wall of the cabinet.

NOTE: Make sure both sets of track hooks are in

slots and that the slots are parallel to each other.

2. Push track backward and down.

3. Check that track is completely seated in the shelf

supports,

Sheff

support

Make sure both sets of hooks are In

support slots.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 93 94

No comments

Whirlpool ED22DQ Specifications Page 11