Whirlpool Freezer Refrigerator Specifications download pdf (Page 7)

Reversing the door swing...

You can change the hinges on your refrigerator

so the doors open the other way. You will need a

~20 Torx head screwdriver. Refer to the instruction

sheet included with your refrigerator.

Removing and adjusting the freezer shelf...

To remove the shelf:

1. lift front slightly.

2. Lift back off supports.

3. Replace in reverse order.

To adjust the shelf:

1. Remove shelf.

2. Remove supports by sliding upwards

3. Replace supports on desired level.

4. Replace shelf.

Ice cube trays...

To remove ice:

If cubes are not used, they may shrink. The mov-

ina cold air starts a slow evaporation. The longer

ctbes are stored, the smallerthey get.

SUPPORT

Optional automatic ice maker...

if you have the automatic ice maker accessory.

or it you plan to add one later (Part No. ECKMF-861,

there are a few things you will want to know:

The ON/OFF lever is a wire signal arm

Down...for making ice automatically

Up...to shut off the ice maker.

DO NOT TURN ICE MAKER ON UNTIL IT IS CON-

NECTED TO THE WATER SUPPLY.

* The dial or lever on the side of the Ice maker

changes the size of the cubes.

Shake the bin occasionally to keep cubes sepa-

rated, and to obtain increased storage capacrty

It IS normal for ice crescents to be attached by a

corner. They will break apart easily.

LOWER

SIGNAL

ARM TO

START IT

You WIII hear water running when ice maker is

working. You’ll hear ice fall into the bin. Don’t let

these sounds bother you,

The ice maker will not operate until the freezer

is cold enough to make ice. This can take

overnight.

Because of new plumbing connections, the first

ice may be discolored or off-flavored. Discard

the first few batches of ice.

If Ice is not being made fast enough and more

Ice is needed, turn the Refrigerator Control to-

ward a higher number. Wait a day and, if neces-

sary, turn the Freezer Control toward A.

If you remove the ice bin, raise the signal arm to

shut off the ice maker. When you return the bin,

push it all the way in and lowerthe arm to the ON

position.

If cubes are stored too long, they may develop

an off-flavor...like stale water. Throw them away.

They will be replaced. Cubes in the ice bin can

also become smaller by evaporation.

Good water quality is important for good ice

quality. It is not recommended that the ice maker

be connected to a softened water supply. Water

softener chemicals such as salt from a malfunc-

tioning softener can damage the ice maker

mold and lead to poor quality ice. If a softened

water supply cannot be avoided, then it is impor-

tant that the water softener be well maintained

and operating properly.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

No comments

Whirlpool Freezer Refrigerator Specifications Page 7

Comments to this Manuals

Related products and manuals for Fridges Whirlpool Freezer Refrigerator