Whirlpool Freezers Specifications download pdf (Page 11)

Raise

signal

arm to

stop ice.

Lower

signal

arm to

start it.

Automatic ice maker

Here are a few things you will want to know about

your automatic ice maker:

The ON/OFF lever is a wire signal arm.

Down.. .for making ice automatically.

Up...to shut off the ice maker.

NOTE:

Do not turn ice maker on until it is con-

nected to the water supply. Instructions for

ice maker water supply hook-up are

attached to the back of the refrigerator

cabinet.

It is normal for ice crescents to be attached by a

corner. They will break apart easily.

The ice maker will not operate until the freezer

is cold enough to make ice. This can take

overnight.

If ice is not being made fast enough and more ice

is needed, turn the Refrigerator Control toward a

higher number. Wait a day and, if necessary, turn

the Freezer Control toward C.

Good water quality is important for good ice

quality. It is not recommended that the ice maker

be connected to a softened water supply. Water

softener chemicals such as salt from a malfunc-

tioning softener can damage the ice maker mold

and lead to poor quality ice. If a softened water

supply cannot be avoided, then it is important

that the water softener be well maintained and

operating properly.

Removing ice maker storage bin

Remove, empty and clean the storage bin:

If the ice dispenser has not, or will not, be used

for a week or more;

If a power failure causes ice in the bin to melt and

freeze together;

If the ice dispenser is not used regularly.

Pull the covering panel out from the bottom and

slide it to the rear.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comments to this Manuals

No comments

Whirlpool Freezers Specifications Page 11

Comments to this Manuals

Related products and manuals for Fridges Whirlpool Freezers