Whirlpool Freezers Specifications download pdf (Page 9)

Changing the light bulbs

Electrical Shock Hazard

Before removing a light bulb, either unplug

the refrigerator or disconnect the electricity

leading to the refrigerator at the main power

supply. Failure to do so could result in

electrical shock or personal injury.

To change the refrigerator light:

1. Disconnect refrigerator from power supply.

2. Reach behind the Control Console to find bulb.

3. Remove bulb.

4. Replace with a 40-watt tubular appliance bulb.

5. Reconnect power supply.

To change crisper light:

1. Disconnect refrigerator from power supply.

2. Pull top of light shield forward until it snaps free.

3. Lower light shield to clear bottom supports.

4. Pull light shield straight out to remove.

5. Replace with a 40-watt appliance bulb.

6. Replace light shield in reverse order.

7. Reconnect power supply.

To change upper freezer light

(ED25PW only):

1. Disconnect refrigerator from power supply.

2. Lift top of light shield up and pull shield out.

3. Replace bulb with a 40-watt appliance bulb.

4. Place shield over bulb and snap into place.

5. Reconnect power supply.

To change light below ice bin:

1. Disconnect refrigerator from power supply.

2. Push in sides of light shield until it snaps free.

3. Replace bulb with a 40-watt appliance bulb.

4. Replace the light shield.

5. Reconnect power supply.

To change dispenser light:

1. Disconnect refrigerator from power supply.

2. Reach the bulb through the dispenser area.

3. Replace with a heavy-duty IO-watt bulb.

4. Reconnect power supply.

NOTE: Not all commercial appliance bulbs will fit

your refrigerator. Be sure to replace bulb with one

of the same size and shape.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

No comments

Whirlpool Freezers Specifications Page 9