Whirlpool GB2SHKXMQ00 User Manual download pdf (Page 12)

Crisper and Crisper Cover

(on some models - Accessory)

To Remove and Replace the Crisper(s):

1. Slide crisper(s) straight out to the stop. Lift the front of the

crisper(s) and slide out the rest of the way.

2. Replace the crisper(s) by sliding back in fully past the drawer

stop.

To Remove the Crisper(s) Cover:

1. Remove crisper(s).

2. Holding the glass insert firmly with one hand, press up in

center of glass insert until it rises above the plastic frame.

Carefully, slide the glass insert forward to remove.

3. Lift the cover frame up and remove it.

To Replace Crisper(s) Cover:

NOTE: Before reinstalling the cover, make sure the U-shaped

reinforcement bar is reinstalled in the front edge of the crisper

cover.

1. Fit back of cover frame into supports on side walls of the

refrigerator and lower the front of the cover frame into place.

2. Slide rear of glass insert into cover frame and lower front into

place.

Crisper Humidity Control

(on some models)

You can control the amount of humidity in the moisture-sealed

crisper. Adjust the control to any setting between LOW and

HIGH.

LOW (open) lets moist air out of the crisper for best storage of

fruits and vegetables with skins.

■ Fruit: Wash, let dry and store in refrigerator in plastic bag or

crisper. Do not wash or hull berries until they are ready to use.

Sort and keep berries in original container in crisper, or store

in a loosely closed paper bag on a refrigerator shelf.

■ Vegetables with skins: Place in plastic bags or plastic

container and store in crisper.

HIGH (closed) keeps moist air in the crisper for best storage of

fresh, leafy vegetables.

■ Leafy vegetables: Wash in cold water, drain and trim or tear

off bruised and discolored areas. Place in plastic bag or

plastic container and store in crisper.

Utility or Egg Bin

(on some models - Accessory)

Depending on your model, you may have a one, two or three

piece bin. Eggs may be stored in the egg tray or loose in the bin.

NOTE: Store eggs in a covered container for long-term storage. If

your model does not have an egg storage bin, store eggs in their

original carton on an interior shelf.

FREEZER FEATURES

Your model may have some or all of these features. Features that

can be purchased separately as product accessories are labeled

with the word “Accessory.” Not all accessories will fit all models.

If you are interested in purchasing one of the accessories, please

call the toll-free number on the cover or in the “Assistance or

Service” section.

Full-Width Wire Shelf

To Remove and Replace the Shelf:

1. Remove items from the shelf. Remove the shelf by pulling it

forward.

2. Replace the shelf by sliding it back in until it locks into place.

Ice Shelf

To Install and Remove Ice Shelf:

1. Slide rear L-shaped groove of shelf down over rear wall

screw. Push rack back until screw is stopped in L-shaped

groove.

2. Place front groove over front wall screw and push down until

shelf is secured.

3. To remove, reverse above steps.

Wire Basket

To Remove and Replace Wire Basket:

1. Remove all items from basket. Remove the basket by lifting

the front of the basket and pulling it forward.

LOW

HIGH

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comments to this Manuals

No comments

Whirlpool GB2SHKXMQ00 User Manual Page 12

Comments to this Manuals

Related products and manuals for Fridges Whirlpool GB2SHKXMQ00