Whirlpool Signature SS25AQXHW00 User Manual download pdf (Page 6)

Electrical Requirements

Before you move your refrigerator into its final location, it is

important to make sure you have the proper electrical

connection:

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused,

grounded electrical supply is required. It is recommended

that a separate circuit serving only your refrigerator be

provided. Use an outlet that cannot be turned off by a

switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning,

or removing a light bulb, turn the Thermostat Control (or

Refrigerator Control depending on the model) to OFF and

then disconnect the refrigerator from the electrical source.

When you are finished, reconnect the refrigerator to the

electrical source and reset the Thermostat Control (or

Refrigerator Control) to the desired setting.

Removing the Doors

NOTE: Before removing doors, open both doors and

remove base grille (see the “Base Grille” section).

Tools Needed:

¹⁄₄-inch hex-head socket wrench and ⁵⁄₁₆-inch hex-head

socket wrench.

1. Unplug refrigerator or disconnect power.

2. If you have a dispenser (ice or water), disconnect water

line (behind base grille).

■ Remove hose from clip.

■ Disconnect union nut and slide it back onto tube.

■ Remove metal insert from tube.

■ Remove union nut and spring.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Failure to follow these instructions can result in

death, fire, or electrical shock.

Do not use an extension cord.

Do not use an adapter.

Do not remove ground prong.

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or

electrical shock.

1 2 3 4 5 6 7 8 9 10 11 ... 50 51

Comments to this Manuals

No comments

Whirlpool Signature SS25AQXHW00 User Manual Page 6

Comments to this Manuals

Related products and manuals for Fridges Whirlpool Signature SS25AQXHW00