Whirlpool SV216BL Instruction for Use download pdf (Page 23)

23

1. The appliance does not work.

• Is there a power failure?

• Is the plug properly inserted in the socket?

• Is the double-pole switch on?

• Has the fuse blown?

(Only applies to UK power cords)

• Is the power cord damaged?

• Is the thermostat set to O (Stop)?

2. Temperature inside the compartments is

not low enough.

• Is the door shut properly?

• Is the appliance installed near a heat source?

• Is the thermostat setting correct?

• Are the air circulation grilles blocked?

3. Temperature inside the refrigerator

compartment is too low.

• Is the thermostat setting correct?

4. There is water on the bottom of the

refrigerator compartment.

• Is the defrost water drain blocked?

5. The inside light does not work.

Perform the checks for problem 1, and then:

• Unplug the appliance from the mains power

supply.

Notes:

• The front edge of the appliance may be hot.

This prevents the formation of condensation

and is not a defect.

• Gurgling and hissing noises due to expansion

in the refrigerant circuit are normal.

TROUBLESHOOTING GUIDE

Before contacting the After-Sales Service:

1. See if you can solve the problem yourself with

the help of the "Troubleshooting guide".

2. Restart the program to check whether the

problem persists. If it does, switch off the

appliance and repeat the procedure an hour

later.

3. If the problem reoccurs after this course of

action, contact the After-Sales Service.

Specify:

• they type of problem,

• the model,

• the Service number (the number given after the

word SERVICE on the rating plate inside the

appliance),

• your full address,

• your telephone number (including the area code).

Note

The door opening direction can be changed. If

this procedure is performed by the After-

Sales Service it is not covered by warranty.

AFTER-SALES SERVICE

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 195 196

Comments to this Manuals

No comments