Whirlpool CTAR 7743/2 IN Instruction for Use download pdf (Page 5)

R = Min. 6,5 mm

Max. 8 mm

490 mm

750 mm

Min. 70 mm

513 mm

Min. 70 mm

773 mm

750 mm

490 mm

482 mm

742 mm

510 mm

42/46 mm

R = 11,5 mm

R = Min. 6,5 mm

6 mm

min 20 mm

FLUSH INSTALLATION

770 mm

STANDARD INSTALLATION

770 X 510 mm

- Install a separator panel under the hob.

- The lower part of the product must not be accessible after installation.

- Do not t the separator panel if an undertop oven is installed.

IMPORTANT:

- The distance between the underside of the appliance and the separator panel

must respect the dimensions given in the gure;

- If an oven is installed under the hob, make sure the oven is equipped with a

cooling system;

- Do not install the hob above a dishwasher or washing-machine, so that the

electronic circuits do not come into contact with steam or moisture which could

damage them.

PLACING THE HOB

After the electrical connection (see the chapter “Electrical connection”) position each xing clips on the dedicated slots on the lateral sides of the hob as shown

in the picture. Then push the hob inside the cut out and check that the glass is at and parallel to the worktop. The xing clips are designed for every type of

worktop material (wood, marble, etc).

IMPORTANT:

- Use protective gloves during hob installation

WARNING

6-7 cm

Min. 20 mm

Min. 5 mm